CXA3503R Datasheet, PDF (1/42 Pages) Sony Corporation – Driver/Timing Generator for Color LCD Panels

CXA3503R
Driver/Timing Generator for Color LCD Panels
Description
The CXA3503R is an IC designed to drive the color
LCD panels LCX032 and LCX033.
This IC greatly reduces the number of peripheral
circuits and parts by incorporating a RGB driver and
timing generator for video signals onto a single chip.
This chip has a built-in serial interface circuit and
electronic attenuators which allow various settings to
be performed by microcomputer control, etc.
72 pin LQFP (Plastic)
Features
• Color LCD panel LCX032 and LCX033 driver
• Supports NTSC and PAL systems
• Supports 16:9 wide display (letter box and pulse
elimination display)
• Supports Y/color difference and RGB inputs
• Supports OSD input (digital input)
• Power saving function
• Serial interface circuit
• Electronic attenuators (D/A converter)
• Trap and LPF (f0, fc variable)
• COMMON output circuits
• Sharpness function
• 2-point γ correction circuit
• R, G, B signal delay time adjustment circuit
• D/A output pin (0 to 3V, 8 level output)
• Output polarity inversion circuit
• Supports AC drive for LCD panel during no signal
Applications
Color LCD viewfinders
Absolute Maximum Ratings (Ta = 25°C)
• Supply voltage VCC1
6
V
VCC2
15
V
VCC3
15
V
VDD
5.5
V
• Analog input pin voltage
VINA (Pins 57, 58 and 59)
GND – 0.3 to VCC1 + 0.3 V
VINA (Pins 3, 69)
VCC1
V
VINA (Pin 30)
1.5 to VCC2 – 4
V
VINA (Pin 71)
0.9
Vp-p
VINA (Pins 70, 72)
0.8
Vp-p
• Digital input pin voltage
VIND (other than Pins 5, 10, 14, 15 and 16)
VSS – 0.3 to VDD + 0.3 V
VIND (Pins 5, 10)
VSS – 0.3 to +5.5 V
• Common input pin voltage
VINAD (Pins 14, 15 and 16)
GND, VSS – 0.3 to +5.5 V
• Operating temperature
Topr
–15 to +75 °C
• Storage temperature
Tstg
–55 to +150 °C
• Allowable power dissipation
PD (Ta ≤ 25°C) 737
mW
Operating conditions
• Supply voltage
VCC1 – GND1 2.7 to 3.6
V
VCC2 – GND2 11.0 to 14.0
V
VCC3 – GND3 11.0 to 14.0
V
VDD – Vss
2.7 to 3.6
V
• Input voltage
SIG.C voltage
VSIG.C
5.0 to 6.5
V
RGB input signal voltage (Pins 70, 71 and 72)^∗1
VRGB
0 to 0.7 (0.5 typ.) Vp-p
Y input signal voltage (Pin 71)^∗2
VY
0 to 0.5 (0.35 typ.) Vp-p
R-Y input voltage (Pin 72)^∗2
VR-Y
0 to 0.49 (0.245 typ.) Vp-p
B-Y input voltage (Pin 70)^∗2
VB-Y
0 to 0.622 (0.311 typ.) Vp-p
∗1 _{During RGB input}
∗2 _{During Y/color difference input}
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E99733A98-PS