CXA2502M Datasheet, PDF (1/11 Pages) Sony Corporation – Dolby B-C Type Noise Reduction System for Playback

CXA2502M
Dolby^∗ B-C Type Noise Reduction System for Playback
Description
The CXA2502M is a bipolar IC incorporating stereo
Dolby B-C type noise reduction (NR) system for
playback.
Pins of this IC are compatible with those of the
Dolby B type NR ICs CXA1102M/ CXA1552M.
A reduction in the number of external parts and
small package have been achieved due to the fact
that the spectral skewing circuits are all on-chip and
this IC is intended for playback.
Features
• Few external parts
• Spectral skewing circuit are on-chip
• NR OFF/B/C and AUX/TAPE switches
• Small package (16-pin SOP)
• Low current consumption 12mA Typ.
• Built-in two channels
Structure
Bipolar silicon monolithic IC
Absolute Maximum Ratings (Ta = 25°C)
• Supply voltage
VCC
17
V
• Operating temperature Topr –40 to +85 °C
• Storage temperature Tstg –65 to +150 °C
• Allowable power dissipation
PD 600 (SOP) mW
16 pin SOP (Plastic)
∗ _{This IC is available only to the licensees of Dolby Laboratories Licensing Corporation from whom licensing and applications}
information may be obtained.
∗ _{“Dolby” and the double D symbols are trademarks of Dolby Laboratories Licensing Corporation.}
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E95621A5X-PS