SN8P1600 Datasheet, PDF (40/94 Pages) SONiX Technology Company – 8-Bit Micro-Controller

SN8P1600
8-bit micro-controller
In power-fail condition as Brown-out reset. The reset pin may keep high level but the VDD is low voltage. That makes
the system reset fail and chip error. To connect a diode from reset pin to VDD is a good solution. This circuit can force
the capacitor to release electrical charge and drop the voltage, and solve the error.
DIODE
R
20K ohm
C
0.1uF
VDD
RST _MCU
VSS
VCC
GND
LOW VOLTAGE DETECTOR (LVD) DESCRIPTION
The LVD is a low voltage detector. It detects VDD level and reset the system as the VDD lower than the desired
voltage. The detect level is 2.4V. If the VDD lower than 2.4V, the system resets. The LVD function is controlled by code
option. Users can turn on it for special application like power-fail condition. LVD work with external reset function. They
are OR active.
VDD
LVD Detect Level
LVD
System Reset
End of LVD Reset
The LVD can protect system to work well under Brown-out reset, but it is a high consumptive circuit. In 3V condition,
the LVD consumes about 100uA. It is a very large consumption for battery system, but supports AC system well.
Note: LVD is enabled by code option.
SONiX TECHNOLOGY CO., LTD
Page 40
Revision 1.94