SNC745_05 Datasheet, PDF (1/15 Pages) SONiX Technology Company – 16-bit Voice Processor

SNC745
16-bit Voice Processor
1. INTRODUCTION
SNC745 is a 64mins two-channel speech/melody and 4-channel wave-table melody
voice chip. It based on reduced 16-bit fixed-point DSP architecture. SNC745 provides
user some necessary and efficient DSP instructions. Furthermore, SNC745 provide
one 10-bit PWM and one 10-bit DA converter to driving speaker for speech/melody
output. User can select PWM or DA by programming DA/PWM control register, and
only one function can be active at the same time.
2. FEATURES
Power supply: 2.4V ~ 3.6V (for 2 battery application)
3.6V ~ 5.1V (for 3 battery application)
Built-in a 16-bit DSP (Very Light Structure)
Software-based voice/melody processing
Rich Function Instruction Set
System Clock
− 16MHz crystal or R-C type oscillator for system clock
− 0.25s real time clock is form 32768Hz crystal
8 MIPS CPU performance
I/O Ports:
− 16 I/O pins (P0.0~P0.15) and 8 input pins (P1.0~P1.7)
− P0.15 with IR carrier signal
RAM size: 2K*16 bits
High performance program ROM: 32K*16 bits
Data ROM size: 480K*16 bits
Total ROM size: 512K*16 bits
Maximum program size: 64K word
8 Interrupt Sources
− 4 for Internal Timer (timer0, 1, 2 and RTC)
− 4 for External (P0.0~P0.3)
Two voice/melody channels
Three 8-bit timer with auto-reload function
Built in a 10-bit PWM Direct Drive circuit and a fixed current D/A output
Sampling Rate: 8KHz ~16KHz
Built-in software voice synthesizer (multiple bit-rate solution 2Kbps, 2.8Kbps,
3.6Kbps, 8Kbps, 10Kbps, 12Kbps, 14Kbps, 16Kbps, 20Kbps, 24Kbps, and
29Kbps @8K, 10K, 12K, 14K, 16K sampling rate)
Built-in software melody synthesizer includes the dual-tone melody and 4-ch
wave-table melody.
Low Voltage Reset
Ver. 1.4
1
August 31, 2005