SMF5.0A Datasheet, PDF (4/6 Pages) UN Semiconducctor INC – Surface Mount Transient Voltage Suppressors (TVS)

Surface Mount Transient Voltage Suppressors (TVS)
SMF Series 5.0 To 190 V 200W
I-V Curve Characteristics
Physical Specifications
Case
Polarity
Terminal
SOD-123 Molded Plastic over glass
passivated junction
Color band denotes cathode except
Bipolar
Matte Tin-plated leads, Solderable per
JESD22-B102D
Soldering Parameters
TP
TL
TS(max)
Ramp-up
TS(min)
25
Preheat
Time to peak temperature
(t 25℃ to peak)
Critical Zone
TL to TP
Ramp-down
Time
Environmental Specifications
Temperature Cycle
Pressure Cooker
High Temp. Storage
HTRB
Thermal Shock
JESD22-A104
JESD22-A102
JESD22-A103
JESD22-A108
JESD22-A106
Reflow Condition
Lead–free assembly
Pre Heat
-Temperature Min (Ts(min))
-Temperature Max (Ts(max))
150°C
200°C
- Time (min to max) (ts)
60 -180 Seconds
Average ramp up rate ( Liquidus Temp TL)
to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
Reflow
- Temperature (TL) (Liquidus)
- Time (min to max) (ts)
Peak Temperature (TP)
3°C/second max
217°C
60 -150 Seconds
260 +0/-5°C
Time within 5°C
Temperature (tp)
of
actual
peak
20 -40 Seconds
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
Do not exceed
8 minutes Max
280°C
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
4/6
www.socay.com
@ SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.