SC0805ML050M Datasheet, PDF (1/8 Pages) Socay Electornics Co., Ltd. – Surface Mount Multilayer Varistor

Surface Mount Multilayer Varistor
SC0805ML - SC2220ML Series
Description
The SC Series is based on Multilayer fabrication technology.
These components are designed to suppress a variety of
transient events, including those specified in IEC 61000-4-2 or
other standards used for Electromagnetic Compliance (EMC).
The SC Series is typically applied to protect integrated circuits
and other components at the circuit board level. It can operate
over a wider temperature range than zener diodes.
Features
u Rectangle, sizes serialization for hybrid integrated circuit
or printed circuit surface mount components
u There are many side electrode lead-out material,
particularly suitable for surface mount technology for
solderability and resistance to soldering heat of the
stringent requirements
u Fast response (<1ns)
u Low leakage current, low clamping voltage
u Suitable for reflow, wave soldering and hot air hand
soldering
Equivalent Circuits
Applicable
u Application for Mother Board, Notebook, Cellular Phone,
PDA, handheld device, DSC, DV, Scanner, and Set- Top
Box…etc.
u Suitable for Push-Button, Power Line and Low
Frequency single line over-voltage protect.
Explanation of Part Number
SC 0805 ML 080 M
(1) (2) (3) (4) (5)
(1) Socay Logo
(2) Chip Size (EIA): 0402 / 0603
(3) Series Type: ML- Multilayer Varistor
(4) Varistor Voltage: Value - 080= 08X10⁰=8V, 120=12X10⁰=12V
(5) Varistor Voltage Tolerance: N - ±30%, M - ±20%, L - ±15%, K - ±10%
SOCAY Electronics Co., Ltd.
Revision November 28, 2013
1/8
www.socay.com
@SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.