ESDP051210V12C0 Datasheet, PDF (1/4 Pages) Socay Electornics Co., Ltd. – ESD Array

ESD Array
ESDP051210V12C0
Description
This specification is applied to electrostatic discharge (ESD)
protection. It is designed to protect the high-speed data lines
against ESD transients. It has very low capacitance and fast
turn on times makes it ideal for data and transmission lines
with high data rates. According to the special property of
device, we recommend not to use on such application as
DC/AC power line.
Features
u Protection against ESD voltages and currents (IEC
61000-4-2 Level 4)
u Extremely quick response time (<1ns) present ideal ESD
protection
u Extremely low capacitance (0.1pF typical)
u Extremely low leakage current and low power
consumption
u Almost zero signal distortion with high cut-off frequency
response of ESD device
u No VDD power supply need and EOS prevent from
VDD/GND impulse impact
Applications
u USB2.0 / USB3.0
u IEEE-1394
u DVI
u HDMI
u Display port
Equivalent Circuits
Marking
Notice:
VDD pin is optional for additional VDD ESD protection, normally regarded as
open N/C pin (ie. no VDD supply need)
Product Model
u Digital Video Equipment
u Mobil Phone
u GPS Antenna
u Bluetooth Communication Equipment
u TV / Monitor
Electrical Characteristics
Characteristic
Rate Voltage VDC (Max)
Leakage Current IL (Max) (@6VDC)
Trigger Voltage VT
Clamping Voltage VC
Capacitance, @1MHz CP
Response time
Peak Pulse Current (TP=8/20,for VDD only)
ESD Voltage Capability, IEC61000-4-2 Contact Discharge Mode
ESD Voltage Capability, IEC61000-4-2 Air Discharge Mode
CP - Device Capacitance measured with 1Vrms
Value
12V
1μA
300V Typical
30V Typical
0.1pF Typical, 0.2pF Max
<1ns
6A
8KV
15KV
SOCAY Electronics Co., Ltd.
Revision November 08, 2013
1/4
www.socay.com
@SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.