ESDP020806V12E0 Datasheet, PDF (1/5 Pages) Socay Electornics Co., Ltd. – ESD Array

ESD Array
ESDP020806V12E0
Description
This specification is applied to protect sensitive electronic
circuits from the threat of electrostatic discharge (ESD). The
function meets with the requirement of IEC61000-4-2
specification. The extreme low capacitance is suit for HDMI
ESD protection application. According to the special property
of device, we recommend not to use on such application as:
DC/AC power line.
Features
u RoHS compliant, Lead-Free
u Protection against ESD voltages and currents (IEC
61000-4-2 Level 4)
u Extremely quick response time (<1ns) present ideal ESD
protection
u Extremely low capacitance (0.1pF typical)
u Extremely low leakage current
u Surface mount device
u Zero signal distortion
Equivalent Circuits
Marking
Applications
u USB3.0
u HDMI
u DVI
u Display port
u MIPI
u LVDS
u MDDI
u DVI
u RGB
Product Model
u Digital Video Equipment
u Mobil Phone
u GPS Antenna
u Bluetooth Communication Equipment
Electrical Characteristics
Characteristic
Value
Rate Voltage VDC (Max)
Leakage Current IL (Max) (@12VDC)
Trigger Voltage VT
Clamping Voltage VC
Capacitance, @1MHz CP
Response Time
12V
0.01μA
300V Typical
30V Typical
0.1pF Typical
<1ns
ESD Voltage Capability, IEC61000-4-2 Contact Discharge Mode 8KV
ESD Voltage Capability, IEC61000-4-2 Air Discharge Mode
15KV
ESD Withstand Pulses
1000 Typical
Rate Voltage – IL measurement Rate Voltage
VT - Measurement by using Transmission Line Pulse (TLP)
VP - The Peak voltage value shall be measured under the following conditions. ESD test conditions:IEC61000-4-2, 8KV contact discharge
VC - Measurement by using Transmission Line Pulse (TLP)
CP - Device Capacitance measured with 1Vrms
SOCAY Electronics Co., Ltd.
Revision November 08, 2013
1/5
www.socay.com
@SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.