GT-1206A Datasheet, PDF (1/3 Pages) Soberton Inc. – THIS SPECIFICATION APPLIES TO THE MAGNETIC BUZZER

MODEL: GT-1206A
PRODUCT: Electro Magnetic Buzzer
EDITION: A/2016
THIS SPECIFICATION APPLIES TO THE MAGNETIC BUZZER
SPECIFICATION
Test condition: TEMP=+25±2 oC Related humidity=65±5% Air pressure:860-1060mbar
item
unit
specification
rated voltage
Vo-p
5.0
operating volt
Vo-p
1.0~2.0
mean current
mA
15 Max
coil resistance
50±15%
sound output
dBA
75
rated frequency
Hz
operating temp
oC
storage temp
oC
dimension
mm
weight
gram
material
terminal
environmental
protection regulation
2700
-20 ~ +60
-30 ~ +80
φ12.0×H6.4
1.6
PPO(Black)
Pin type (Plating Sn)
RoHS
condition
Vo-p
0V
At rated voltage 2700Hz square wave, 1/2 duty
At 10cm(A-weight free air), at rated voltage
2700Hz, square wave, 1/2duty
See attached drawing
See attached drawing
ENVIRONMENT TEST
item
test condition
evaluation standard
high temp. test
low temp. test
thermal shock
After being placed in a chamber at +80oC for
96 hours.
After being placed in a chamber at -30oC for
96 hours.
The part will be subjected to 10 cycles.
One cycle shall consist of:
-30oC
30 min
+80oC
30 min
60 min
After the test the part will meet specifications
without any degradation in appearance and per-
formance except SPL. after 4 hours at +25oC. The
SPL will be in ±10dBA compared with initial one.
temp./humidity cycle
The part will be subjected to 10 cycles.
One cycle shall be 24 hours and consist of:
+80oC
+25oC a b
12±0.5hrs
3hrs
24 hrs
a,b: 90~98%RH
c: 80~98%RH
c
9hrs
PAGE 1/3