USB2513 Datasheet, PDF (31/48 Pages) SMSC Corporation – USB 2.0 High-Speed 3-Port Hub Controller

USB 2.0 High-Speed 3-Port Hub Controller
Datasheet
4.3.1.29
Register FBh: Port Remap 12
BIT
NUMBER
7:0
BIT NAME
PRTR12
DESCRIPTION
Port remap register for ports 1 & 2.
When a hub is enumerated by a USB Host Controller, the hub is only
permitted to report how many ports it has; the hub is not permitted to select
a numerical range or assignment. The Host Controller will number the
downstream ports of the hub starting with the number '1', up to the number
of ports that the hub reported having.
The host's port number is referred to as "Logical Port Number" and the
physical port on the hub is the “Physical Port Number". When remapping
mode is enabled (see PRTMAP_EN in Register 08h: Configuration Data
Byte 3) the hub's downstream port numbers can be remapped to different
logical port numbers (assigned by the host).
Note:
The OEM must ensure that Contiguous Logical Port Numbers are
used, starting from #1 up to the maximum number of enabled ports;
this ensures that the hub's ports are numbered in accordance with
the way a Host will communicate with the ports.
Table 4.3 Port Remap Register for Ports 1 & 2
Bit [7:4]
Bit [3:0]
‘0000’
‘0001’
‘0010’
‘0011’
‘0100’
to
‘1111’
‘0000’
‘0001’
‘0010’
‘0011’
‘0100’
to
‘1111’
Physical Port 2 is Disabled
Physical Port 2 is mapped to Logical Port 1
Physical Port 2 is mapped to Logical Port 2
Physical Port 2 is mapped to Logical Port 3
Illegal; Do Not Use
Physical Port 1 is Disabled
Physical Port 1 is mapped to Logical Port 1
Physical Port 1 is mapped to Logical Port 2
Physical Port 1 is mapped to Logical Port 3
Illegal; Do Not Use
SMSC USB2513
31
DATASHEET
Revision 1.98 (11-19-07)