FDC37M707_07 Datasheet, PDF (161/194 Pages) SMSC Corporation – Super I/O Controller with Wake-Up Features

PARAMETER
OD24 Type Buffer
Low Output Level
Output Leakage
SYMBOL MIN
VOL
IOL
OD48 Type Buffer
Low Output Level
VOL
Output Leakage
IOL
ChiProtect
(SLCT, PE, BUSY, nACK,
nERROR)
OD12 Type Buffer
Low Output Level
Output Leakage
IIL
VOL
IOL
-10
Backdrive
IIL
(nSTROBE, nAUTOFD, nINIT,
nSLCTIN)
Backdrive
IIL
(PD0-PD7)
VCC Supply Current Active
ICCI
4.5
Trickle Supply Voltage
(Note 5)
VTR
VCC
min
-.5V
VTR Supply Current Active
IVRI
(Note 4)
TYP MAX UNITS
COMMENTS
0.4
V
IOL = 24 mA
+10
µA VIN = 0 to VCC
(Note 1)
0.4
+10
± 10
V
IOL = 48 mA
µA VIN = 0 to VCC
(Note 1)
µA VCC = 0V
VIN = 6V Max
0.4
+10
± 10
V
IOL = 12 mA
µA VIN = 0 to VCC
(Note 1)
µA VCC = 0V
VIN = 6V Max
± 10
µA VCC = 0V
VIN = 6V Max
70
90
mA All Outputs Open
VCC
max
V VCC must not be
greater than .5V
above VTR
25
mA All outputs Open
Note 1: All output leakage’s are measured with the current pins in high impedance.
Note 2: Output leakage is measured with the low driving output off, either for a high level output or a
high impedance state.
Note 3: KBCLK, KBDATA, MCLK, MDATA contain 90uA min pull-ups.
Note 4: Please contact SMSC for the latest value.
Note 5: The minimum value given for VTR is for VCC active. When VCC=0, the minimum value given for
VTR is 0V.
161