LAN9218I_07 Datasheet, PDF (111/133 Pages) SMSC Corporation – High-Performance Single-Chip 10/100 Ethernet Controller with HP Auto-MDIX and Industrial Temperature Support

High-Performance Single-Chip 10/100 Ethernet Controller with HP Auto-MDIX and Industrial Temperature Support
Datasheet
5.5.9 Special Modes
Index (In Decimal):
18
Size:
16-bits
ADDRESS
15-8
Reserved
DESCRIPTION
7:5
MODE: PHY Mode of operation. Refer to Table 5.9 for more details.
4:0
PHYAD: PHY Address:
The PHY Address is used for the SMI address.
TYPE DEFAULT
RW,
NASR
RW,
NASR
See
Table 5.9
RW,
NASR
00001b
MODE
000
001
010
011
100
101
110
111
Table 5.9 MODE Control
DEFAULT REGISTER BIT VALUES
MODE DEFINITIONS
REGISTER 0
REGISTER 4
10Base-T Half Duplex. Auto-negotiation disabled.
10Base-T Full Duplex. Auto-negotiation disabled.
100Base-TX Half Duplex. Auto-negotiation disabled.
CRS is active during Transmit & Receive.
100Base-TX Full Duplex. Auto-negotiation disabled.
CRS is active during Receive.
100ase-TX Half Duplex is advertised. Auto-
negotiation enabled.
CRS is active during Transmit & Receive.
Repeater mode. Auto-negotiation enabled.
100Base-TX Half Duplex is advertised.
CRS is active during Receive.
Reserved - Do not set the LAN9218i in this mode.
All capable. Auto-negotiation enabled.
[13,12,10,8]
0000
0001
1000
1001
1100
1100
N/A
X10X
Note 5.4
[8,7,6,5]
N/A
N/A
N/A
N/A
0100
0100
N/A
1111
Note 5.4 When MODE=111, the register 0 bits 13 and 8 are variable dependant on the auto-
negotiated speed and duplex.
SMSC LAN9218i
111
DATASHEET
Revision 1.8 (06-06-07)