|
USB3290 Datasheet, PDF (1/43 Pages) SMSC Corporation – Small Footprint Hi-Speed USB 2.0 Device PHY with UTMI Interface | |||
|
USB3290
Small Footprint Hi-Speed
USB 2.0 Device PHY with
UTMI Interface
PRODUCT FEATURES
Datasheet
 Available in a 40 ball lead-free RoHS compliant
(4 x 4 x 0.9mm) VFBGA package
 Interface compliant with the UTMI specification
(60MHz, 8-bit bidirectional interface)
 Only one required power supply (+3.3V)
 Supports 480Mbps Hi-Speed (HS) and 12Mbps Full
Speed (FS) serial data transmission rates
 Integrated 45Ω and 1.5kΩ termination resistors
reduce external component count
 Internal short circuit protection of DP and DM lines
 On-chip oscillator operates with low cost 24MHz
crystal
 Latch-up performance exceeds 150mA per EIA/JESD
78, Class II
 ESD protection levels of 5kV HBM without external
protection devices
 SYNC and EOP generation on transmit packets and
detection on receive packets
 NRZI encoding and decoding
 Bit stuffing and unstuffing with error detection
 Supports the USB suspend state, HS detection, HS
Chirp, Reset and Resume
 Support for all test modes defined in the USB 2.0
specification
 55mA Unconfigured Current (typical) - ideal for bus
powered applications.
 83uA suspend current (typical) - ideal for battery
powered applications.
 Industrial Operating Temperature -40oC to +85oC
APPLICATIONS
The USB3290 is the ideal companion to any ASIC, SoC
or FPGA solution designed with a UTMI Hi-Speed USB
device (peripheral) core.
The USB3290 is well suited for:
 Cell Phones
 MP3 Players
 Scanners
 External Hard Drives
 Digital Still and Video Cameras
 Portable Media Players
 Entertainment Devices
 Printers
SMSC USB3290
DATASHEET
Revision 1.2 (10-27-06)
|
▷ |