|
USB2641I Datasheet, PDF (1/8 Pages) SMSC Corporation – Industrial Temperature USB 2.0 Flash Media Controller and Hub Combo | |||
|
USB2640i/USB2641i
Industrial Temperature USB 2.0
Flash Media Controller and Hub
Combo
PRODUCT FEATURES
Data Brief
General Description
The SMSC USB2640i/USB2641i is a USB 2.0
compliant, Hi-Speed hub for USB port expansion with an
attached mass storage class peripheral controller. The
controller allows read/write capability to popular flash
media from the following families:
 Secure DigitalTM (SD)
 MultiMediaCardTM (MMC)
 xD-Picture CardTM (xD)1
 Memory Stick®(MS)
The USB2640i/USB2641i is a fully integrated, single
chip solution providing USB expansion and integrated
flash card media reader/writer capability of ultra high
performance operation. Average sustained transfer
rates exceeding 35 MB/s are possible2.
Highlights
 Hub controller with internally connected ultra fast
flash media reader/writer and 2 exposed downstream
ports for external peripheral expansion
 Flash media reader/writer employs multiplexed card
interfaces which are optimized for use with single
card insertion combo sockets
 Hardware-controlled data flow architecture for all self-
mapped media
 Optional support for external firmware access via SPI
interface
 PortMap
â Flexible port mapping and port disable sequencing
supports multiple platform designs
 PortSwap
â Programmable USB differential-pair pin locations eases
PCB design by aligning USB signal traces directly to
connectors
 PHYBoost
â Programmable USB transceiver drive strength recovers
signal integrity
1.Support and capabilities for xD-Picture Card are not
applicable for the USB2641i. Please obtain a user li-
cense from the xD-Picture Card License Office to sup-
port this flash media format.
2.Host and media dependent.
Features
 Compliant with the following flash media card
specifications: SD 2.0 / MMC 4.2 / MS 1.43 / MS-Pro
1.02 / MS-PRO-HG 1.01 / MS-Duo 1.10 / xD 1.2
 Supports a single external 3.3 V supply source;
internal regulators provide 1.8 V internal core voltage
for additional bill of materials and power savings
 The transaction translator (TT) in the hub supports
operation of Full-Speed and Low-Speed peripherals
 9 K RAM | 64 K on-chip ROM
 Enhanced EMI rejection and ESD protection
performance
 On board 24 MHz crystal driver circuit
 Optional external 24 MHz clock input
 Up to 9 GPIOs for special functions
 8051 8-bit microprocessor
 Hub and flash media reader/writer configuration from
a single source: External I2C ROM or external SPI
ROM
â Configures internal code using an external I2C
EEPROM
â Supports external code using a SPI Flash EEPROM
â Customizable vendor ID, product ID, language ID
 EEPROM update via USB
 48-pin QFN lead-free, RoHS compliant package (7x7
mm)
 The SMSC USB2640i/USB2641i supports the
industrial temperature range of -40°C to 85°C
Applications
 Desktop and mobile PCs
 Personal mobile devices
 Printers
 GPS navigation systems
 Media Players/Viewers
 Consumer A/V
 Set-top boxes
 Industrial products
SMSC USB2640i/USB2641i
PRODUCT PREVIEW
Revision 2.1 (06-29-09)
|
▷ |