USB2524 Datasheet, PDF (1/57 Pages) SMSC Corporation – USB MultiSwitch Hub

USB2524
USB MultiSwitch^TM Hub
PRODUCT FEATURES
Datasheet
„ USB2.0 Compatible 4-Port Hub with two upstream
host port connections
— Provides electronic reconfiguration and re-assignment
of any of its 4 downstream ports to either of two
upstream host ports (“on-the-fly”).
— Allows multiple USB hosts to share peripherals and
enables a user to dynamically assign host ownership.
– Embedded Mode - 8 (predefined, OEM
programmable) configurations for port
assignment are selectable via three external
control signals.
– Peripheral Mode - Dedicated select pin for
every downstream port (total of 4), selectable
edge or level triggered in order to support a
wide range of possible switch configurations
and styles.
— Each host has a dedicated Single Transaction
Translator (Single-TT) for supporting FS/LS devices, or
can also operate in Multi-TT mode where each
downstream port has a dedicated Transaction
Translator.
„ Downstream ports can be disabled or defined as non-
removable
„ Switching hub can be configured as compound
device for support of ‘embedded’ USB peripherals
„ Multiple LED modes for maximum implementation
flexibility
— USB Mode - 1 Single-color LED for each downstream
port (total of 8 LED’s).
— Host Ownership Mode - 8 Single-Color LED’s indicate
which upstream host each of the downstream ports are
assigned to.
— Host Ownership & Port Speed Mode - 8 Dual-Color
LED’s are used to indicate which upstream host each
of the downstream ports are assigned to, while
simultaneously indicating downstream port connection
speed.
„ Enhanced configuration options available through
either a Single Serial I²C EEPROM, or SMBus Slave
Port
— VID/PID/DID
— Port Configuration
— String Descriptors (each can support a maximum length
of 31 characters)
– Custom Manufacturer String
– Custom Product String
– Custom Serial String
— Assignment of downstream ports to upstream hosts
— Switching mechanism selection
„ Hardware Strapping options allow for configuration
without an external EEPROM or SMBus Host
— Default VID/PID/DID, allows functionality when
configuration EEPROM is absent
„ Complete USB Specification 2.0 Compatibility
— Includes USB2.0 Hi-Speed Transceivers
— High-Speed (480Mbits/s), Full-Speed (12Mbits/s) and
Low-Speed (1.5Mbits/s) compatible
— Full power management with choice of Individual or
Ganged power control
„ On-Board 24MHz Crystal Driver Circuit or 24 MHz
external clock driver
„ Internal PLL for 480MHz USB2.0 Sampling
„ Internal 1.8V Linear Voltage Regulator
„ Integrated USB termination and Pull-up/Pull-down
resistors
„ Internal Short Circuit protection of USB differential
signal pins
„ 1.8 Volt Low Power Core Operation
„ 3.3 Volt I/O with 5V Input Tolerance
„ 56-Pin QFN Green, Lead-free Package
SMSC USB2524
DATASHEET
Revision 1.2 (07-17-06)