|
USB2227_06 Datasheet, PDF (1/27 Pages) SMSC Corporation – 4th Generation USB2.0 Flash Media Controller with Integrated Card Power FETs | |||
|
USB2227/USB2228
4th Generation USB2.0
Flash Media Controller
with Integrated Card
Power FETs
PRODUCT FEATURES
 Complete System Solution for interfacing SmartMediaTM
(SM) or xD Picture CardTM (xD)1, Memory StickTM (MS),
High Speed Memory Stick (HSMS), Memory Stick PRO
(MSPRO), MS DuoTM, Secure Digital (SD), Mini-Secure
Digital (Mini-SD), TransFlash (SD), MultiMediaCardTM
(MMC), Reduced Size MultiMediaCard (RS-MMC), NAND
Flash, Compact FlashTM (CF) and CF UltraTM I & II, and CF
form-factor ATA hard drives to USB2.0 bus
â Supports USB Bulk Only Mass Storage Compliant
Bootable BIOS
 Support for simultaneous operation of all above devices.
(only one at a time of each of the following groups
supported: CF or ATA drive, SM or XD or NAND, SD or
MMC)
 On-Chip 4-Bit High Speed Memory Stick and MS PRO
Hardware Circuitry
 On-Chip firmware reads and writes High Speed Memory
Stick and MS PRO
 1-bit ECC correction performed in hardware for maximum
efficiency
 Hardware support for SD Security Command Extensions
 On-chip power FETs for supplying flash media card power
with minimum board components
 USB Bus Power Certified
 3.3 Volt I/O with 5V input tolerance on VBUS/GPIO3
 Complete USB Specification 2.0 Compatibility for Bus
Powered Operation
â Includes USB2.0 Transceiver
â A Bi-directional Control and a Bi-directional Bulk
Endpoint are provided.
 8051 8 bit microprocessor
â Provides low speed control functions
â 30 Mhz execution speed at 4 cycles per instruction
average
â 12K Bytes of internal SRAM for general purpose
scratchpad
â 768 Bytes of internal SRAM for general purpose
scratchpad or program execution while re-flashing
external ROM
 Double Buffered Bulk Endpoint
â Bi-directional 512 Byte Buffer for Bulk Endpoint
â 64 Byte RX Control Endpoint Buffer
â 64 Byte TX Control Endpoint Buffer
Datasheet
 Internal or External Program Memory Interface
â 64K Byte Internal Code Space or Optional 64K Byte
External Code Space using Flash, SRAM or EPROM
memory.
 On Board 24Mhz Crystal Driver Circuit
 Can be clocked by 48MHz external source
 On-Chip 1.8V Regulator for Low Power Core Operation
 Internal PLL for 480Mhz USB2.0 Sampling, Configurable
MCU clock
 Supports firmware upgrade via USB bus if âboot blockâ
Flash program memory is used
 15 GPIOs for special function use: LED indicators, button
inputs, power control to memory devices, etc.
â Inputs capable of generating interrupts with either edge
sensitivity
â Attribute bit controlled features:
â Activity LED polarity/operation/blink rate
â Full or Partial Card compliance checking
â Bus or Self Powered
â LUN configuration and assignment
â Write Protect Polarity
â SmartDetach⢠Detach from USB when no Card
Inserted for Notebook apps
â Cover Switch operation for xD compliance
â Inquiry Command operation
â SD Write Protect operation
â Older CF card support
â Force USB 1.1 reporting
â Internal or External Power FET operation
 Compatible with Microsoft WinXP, WinME, Win2K SP3,
Apple OS10, Softconnex, and Linux Multi-LUN Mass
Storage Class Drivers
 Win2K, Win98/98SE and Apple OS8.6 and OS9 Multi-LUN
Mass Storage Class Drivers available from SMSC
 128 Pin VTQFP Lead-free RoHS Compliant Package
(1.0mm height, 14mm x14mm footprint)
 124 Pin DQFN Lead-free RoHS Compliant Package (0.8mm
height, 10mm x10mm footprint)
1.xD Picture Card not applicable to USB2227
SMSC USB2227/USB2228
DATASHEET
Revision 1.91 (10-13-06)
|
▷ |