MINT1275_14 Datasheet, PDF (3/9 Pages) SL Power Electronics – 275W Single Output

EMI/EMC Compliance
Conducted Emissions
Radiated Emissions
Static Discharge Immunity
Radiated RF Immunity
EFT/Burst Immunity
Line Surge Immunity
Conducted RF Immunity
Power Frequency Magnetic Field Immunity
Voltage Dip Immunity
Line Harmonic Emissions
Flicker Test
Mechanical Drawing
MINT1275
275W Single Output
Medical Series
EN55011/22 Class B, FCC Part 15, Subpart B, Class B
EN55011/22 Class A; FCC Part 15, Subpart A, Class A w/6db margin
EN61000-4-2, 6kV Contact Discharge, 8kV air discharge
EN61000-4-3, 3V/m.
EN61000-4-4, 2kV/5kHz
EN61000-4-5, 1kV differential, 2kV common-mode
EN61000-4-6, 3Vrms
EN61000-4-8, 3A/m
EN61000-4-11, 0% Vin, 0.5cycle; 40% Vin, 5 cycles; 70% Vin, 25 cycles
EN61000-3-2, Class A, B, C, & D
EN61000-3-3, Complies (dmax<6%)
Notes:
1. All dimensions in inches (mm), tolerance is +/-0.02”.
2. Mounting holes should be grounded for EMI purposes.
3. FG is safety ground connection.
4. The power supply requires mounting on metal standoffs 0.20” (5mm) in height, min.
Connector Information
Input Connector
PIN 1) AC LINE
PIN 2) EMPTY
PIN 3) AC NEUTRAL
Mating Connector:
Molex 09-50-3031
Pins= 08-52-0072
Ground
0.250” FASTON TAB
Mating Connector:
Molex 01-90020001
DC Output
Connector
Term. 1: +Vout
Term. 2: -Vout
Mating Connector:
Molex 19141-
0058/0063/0083
Fan Output
Connector
PIN 1) +12Vfan RTN
PIN 2) +12V fan
Mating Connector:
Molex 22-01-3027
Pins: 08-50-0114
Signal Connector
PIN 1) Remote Sense (+) Pin 6) Common
PIN 2) Common
Pin 7) Power Good
PIN 3) Remote Sense (-) Pin 8) +5Vsb
PIN 4) Current Share
Pin 9) DC OK
PIN 5) Inhibit
Pin 10) +5Vsb RTN
Mating Connector:
Molex 90142-0010
Pins: 90119-2109 or 2120
www.slpower.com
MINT1275 REV 1.6, 22-Jan-14
3