MW155 Datasheet, PDF (2/2 Pages) SL Power Electronics – 120 Watt Medical Adapter Series

MW155
120 Watt Medical Adapter Series
For the most current data and application support visit www.slpower.com

Ault Part Number
Output ^{Outpu t Currents}
Voltage
Min
Max
MW155RA1251F01
12 V
0.00 A
9.17 A
MW155RA1551F01
15 V
0.00 A
7.33 A
MW155RA1851F01
MW155RA2451F01
18 V
24 V
0.00 A
0.00 A
6.67 A
5.00 A
*12V model rated 100W with input voltages rated 100-110VAC, 110W with input voltages rated 110VAC-240VAC
Ault Part Number Key
MW155
R
Product
Family
Name
Manufacturing
Location
A
Type
Revision
24
Output
Voltage
51
Output
Connector
Style
F
Input
Connector
Style
Max
Watts
110.0 W*
110.0 W
120.0 W
120.0 W
01
Standard Item
(other numbers
for custom)
General Specifications (continued from p. 1)
EMI Compliance
EN55011 and FCC conducted and radiated Class B
IEC 61000-3-2 Class D
IEC 61000-4-2 (ESD), CD level 2 and AD level 3, criterion B
IEC 61000-4-3 (RFS), level 2, criterion A
IEC 61000-4-4 (EFT), level 2, criterion A
IEC 61000-4-5 (Surge), level 3, criterion B
Output Connectors
Input Connectors
Ault #51 Minifit over molded connector standard
IEC320
w/ground
C14
(F)
IEC320
w/o ground
C18
(Q)
N. America/
Japan
(B)
Europe
(M)
United
Kingdom
(G)
Australian
(E)
Shaver
C8
(N)
Optional Features
Various output cord wire gauges and connector styles available. See Ault
connector style sheets for connector options
“Power-on” LED
Active, Latch-off over temperature protection circuit
Synchronous rectification
Private label marking
2007 Energy Independence and Security Act – EISA
The Energy Independence and Security Act of 2007 was passed in December of
2007 and addresses minimum efficiency standards and standby levels for Class
A external power supplies that are 250 watts and under. This law stipulates
that external power supplies manufactured on July 1, 2008 and beyond meet
certain minimum efficiency and standby criteria as defined below.
Minimum Efficiency Criteria
Active mode is defined as when a power supply’s input is connected to line
voltage AC and its output is connected to a DC or AC load drawing a portion
of the product’s power output. Depending on the power rating for the power
supply, it must meet the minimum efficiency criteria outlined below.
Energy-Efficiency Criteria for Active Mode:
output power on
minimum average
adapter label
efficiency percentage
0 to ≤ less than 1 watt
≥ 0.50 * output power on adapter label
> 1 to ≤ 51 watts
≥ [0.09 * Ln (output power on adapter
label )] + 0.50
> 51 watts
≥ 0.85
The power supply must also meet a requirement for when its input is
connected to a line voltage AC but its output is not connected to a load.
Depending on the power output of the supply, it must keep its energy
consumption below the following values.
Energy Consumption Criteria for No Load Mode:
output power on
maximum power consumption
adapter label
in no-load mode
0 to < 250 watts
≤ 0.5 watts
SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:[phone] • Fax:[phone] • Email:[e-mail] • www.slpower.com
Data Sheet © 2008 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication.
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
Rev.6/9/08