LE75SCD Datasheet, PDF (2/4 Pages) SL Power Electronics – 75W Single Output LED Driver Series

LE75S-CD
75W Single Output
LED Driver Series
General Specifications (continued)
Input Fuses XA, 250VAC fuses provided on all models
Earth Leakage
Current
<1mA@277Vac, 50Hz
Efficiency See Models chart.
Output Power 75W continuous
Ripple and Noise See chart
Output Voltage See chart
Total Regulation +/- 3%. See chart
Dimensions W: 2.66” x L: 5.91” x H: 1.46”
Weight 750g
Overload
Protection
Constant Current
Short Circuit
Protection
Provided - no damage to unit, self-recovery.
Overvoltage
Protection
Overtemperature
Protection
Latch mode. AC input will need to be reset to
return to normal operation after an OVP condition.
See chart for trip range.
Latch mode. AC input will need to be reset to
return to normal operation after an OTP
condition. Trip Temperature = 110°C typical.
Operating Operating: -35°C to +70°C
Temperature Non-operating: -40°C to +85°C
Relative 10% to 95% operating
Humidity 5% to 100%, non-operating
UL8750, UL935, UL1012, UL1310 Class 2;
Safety Standards CSA-C22.2 No. 107.1, CSA C22.2 No. 223-M91
Class 2; EN61347-1, EN61347-2-13
MTBF
450,000 hours (2800mA model, at 110Vac input,
80% load, 25°C ambient, per MIL-HDBK-217F).
Lifetime
65,000 hours (2800mA model, at 110Vac input,
80% load, 45°C ambient temperature.
EMI/EMC Compliance
Emissions
EN55015, Radiated & Conducted with 6db of margin
EMI for Lighting Equipment
EN61547
Static Discharge Immunity
EN61000-4-2, 4kV Contact Discharge, 8kV air discharge
Radiated RF Immunity
EN61000-4-3
EFT/Burst Immunity
EN61000-4-4
Line Surge Immunity
EN61000-4-5, 2kV line-line, 4kV line-earth
Conducted RF Immunity
EN61000-4-6
Power Frequency Magnetic Field Immunity EN61000-4-8
Voltage Dip Immunity
EN61000-4-11
Line Harmonic Emissions
EN61000-3-2
Flicker Test
Transient Protection
EN61000-3-3
ANSI/IEEE C62.41-1991: Class A operation. Line transient of 7 strikes of a 100kHz ring wave,
2.5kV level, common and differential mode.
www.slpower.com
LE75S-CD 15-April-13
2