LE150S-VN Datasheet, PDF (2/3 Pages) SL Power Electronics – 150W Single Output LED Driver Series

General Specifications (continued)
Earth Leakage
Current
<1.0mA@277Vac, 50Hz
Efficiency See Models chart.
Output Power 150W continuous
Ripple and Noise See chart
Output Voltage See chart
Total Regulation +/- 3%. See chart
Dimensions W: 3.13” x L: 9.37” x H: 1.81”
Weight 1500g
EMI/EMC Compliance
Emissions
EMI for Lighting Equipment
Static Discharge Immunity
Radiated RF Immunity
EFT/Burst Immunity
Line Surge Immunity
Conducted RF Immunity
Power Frequency Magnetic Field Immunity
Voltage Dip Immunity
Line Harmonic Emissions
Flicker Test
LE150S-VN
150W Single Output
LED Driver Series
Short Circuit
Protection
Provided - no damage to unit, self-recovery.
Overvoltage
Protection
Overtemperature
Protection
Latch mode. AC input will need to be reset to
return to normal operation after an OVP
condition. See chart for trip range.
Latch mode. AC input will need to be reset to
return to normal operation after an OTP
condition. Trip Temperature = 110°C typical.
Operating Operating: -35°C to +70°C
Temperature Non-operating: -40°C to +85°C
Relative Humidity
10% to 100% operating
5% to 100%, non-operating
Safety Standards
UL8750, UL935, UL1012, CSA-C22.2 No. 0, No.
107.1, & No. 250.0, EN61347-1, EN61347-2-13
MTBF
261,000 hours (110Vac input, 80% load, 25°C
ambient, per MIL-HDBK-217F).
Lifetime
78,000 hours (220Vac input, 80% load, 60°C
case temperature).
EN55015, Radiated & Conducted
EN61547
EN61000-4-2, 4kV Contact Discharge, 8kV air discharge
EN61000-4-3
EN61000-4-4
EN61000-4-5, 4kV line-line, 6kV line-earth
EN61000-4-6
EN61000-4-8
EN61000-4-11
EN61000-3-2
EN61000-3-3
www.slpower.com
LE150S-VN REV 2.0,11-FEB-2013
2