GPFM1200 Datasheet, PDF (2/2 Pages) SL Power Electronics – 1200 WATT GLOBAL PERFORMANCE SWITCHERS

Medical Model
Output Voltage (1)
Output Current (2)
Total Regulation (3)
GPFM1200-48
48 V
25 A
2%
Notes:
1.Output voltage is manually adjustable +5%.
2. Maximum continuous current rating is with integral fan.
3. Combined initial voltage set point, line, load and temperature regulation.
4.Differential mode noise measured with scope probe (20 MHz bandwidth) directly across output connector of the
power supply with load terminated with 0.1 μF capacitor.
5.Output is floating (500 Vac or +700 Vdc); either +Vout or Vout Return may be connected to chassis ground.
Ripple and Noise (4)
480 mV p-p
OVP Set Point
51.0-59.0 V
GPFM1200 MECHANICAL SPECIFICATIONS
Dimensions: Inches
Millimeters
ENVIRONMENTAL SPECIFICATIONS
Temperature (A)
Humidity (A)
Shock (B)
Altitude
Vibration (C)
OPERATING
0 to 50°
0 to 95% RH
20 g_pk
-500 to 10,000 ft
1.5 g _rms’ 0.003 g²/Hz
NON-OPERATING
-40 to +85°C
0 to 95% RH
40 g_pk
-500 to 40,000 ft
5 g _rms’ 0.026 g²/Hz
A. Units should be allowed to warm up/operate under non-condensing
conditions before application of power. Cooling provided by internal
fan— heatsink temperatures should not exceed 90oC for extended
periods in the installation. Derated maximum output power by 2.5% per
degree C above 50oC.
B. Random vibration—10 to 2000Hz, 6dB/octave roll-off from 350 to
2000Hz, 3 orthogonal axes. Tested for 10 min./axis operating and 1
hr./axis non-operating.
C. Shock testing—half-sinusoidal, 10 ± 3 ms duration, ± direction, 3
orthogonal axes, total 6 shocks.
Condor DC Power Supplies Inc. 2311 Statham Parkway, Oxnard CA, 93033, USA. Phone:[phone] Fax:[phone] Email: [e-mail] Rev. 10/05.
Data Sheet © 2005 Condor DC Power Supplies Inc. The information and specifications contained in this data sheet are believed to be correct at time of publication.
However, Condor accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.