GPC50 Datasheet, PDF (2/2 Pages) SL Power Electronics – 50 WATT GLOBAL PERFORMANCE SWITCHERS

Commercial
Model
GPC50A
GPC50F
Output No.
1
2
3
1
2
3
Output
+5 V
+12 V
-12 V
+5 V
+12 V
-12 V
Output
Minimum
0.4 A
0A
0A
0.4 A
0A
0A
Output
Maximum
5A
2A
0.5 A
5A
1.2 A
0.5 A
Output Peak
7A
3A
1A
7A
1.5 A
1A
Noise P-P
50 mV
120 mV
120 mV
50 mV
120 mV
120 mV
Total
Regulation (A)
2%
5%
3%
2%
3%
3%
Notes
B,C,D
D
D
D
A. Total regulation is defined as the maximum deviation from the nominal voltage for all steady-state conditions of initial voltage setting, input line voltage and
output load.
B. To maintain these regulation conditions, the 5.1 V current must be at least 1/4 of V2 and not greater than 5 times the V2 current.
C. Requires +5 V to be adjusted within ±1% with at least a 0.4 A load to maintain regulation on this output since its centering voltage tracks the V1 adjustment.
D. Requires +5 V to have at least a 0.4 A load.
E. Add “G” suffix to part number for RoHS compliant model. Contact factory for availability.
GPC50 MECHANICAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS OPERATING
NON-OPERATING
Temperature (A)
See individual specs. -40 to +85°C
Humidity (A)
0 to 95% RH
0 to 95% RH
Shock (C)
Altitude
20 g_pk
-500 to 10,000 ft
40 g_pk
-500 to 40,000 ft
Vibration (B)
1.5 g _rms’ 0.003 g²/Hz 5 g _rms’ 0.026 g²/Hz
A. Units should be allowed to warm up/operate under non-condensing
conditions before application of power.
B. Random vibration—10 to 2000Hz, 6dB/octave roll-off from 350 to
2000Hz, 3 orthogonal axes. Tested for 10 min./axis operating and
1 hr./axis non-operating.
C. Shock testing—half-sinusoidal, 10 ± 3 ms duration, ± direction, 3
orthogonal axes, total 6 shocks.
SL Power Electronics, Inc. 6050 King Drive, Bldg. A, Ventura, Ca 93003, USA. Phone:[phone] Fax:[phone] Email: [e-mail]. Rev. 8/18/2009.
Data Sheet © 2009 SL Power Electrontics Inc. The information and specifications contained in this data sheet are believed to be correct at time of publication.
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.