TE10 Datasheet, PDF (1/4 Pages) SL Power Electronics – 10W-12W Single Output External Power

TE10
10W-12W Single Output External Power
Test & Measurement/Industrial Series
Features
 Meets DoE Efficiency Level VI Requirements
 No load input power
 Average Efficiency
 Up to 12W of AC-DC Power
 Universal Input 90-264Vac Input Range
 Desktop and Wall-Plug versions
 Meets “Heavy Industrial” Levels of EN61000
EMC Requirements
 Meets EN55022/CISPR22, FCC Part 15.109
Class B Conducted & Radiated Emissions, with
6db margin
 Approved to EN/IEC/UL60950-1, 2^nd Ed., Am.2
 E-cap life of >10 years
 >1,000,000 Hours MTBF
LPS
 3 Year Warranty
 IP22 Rated Enclosure
Description
A high performance AC to DC external power supply family designed for test & measurement and industrial applications.
Fully compliant with Efficiency Level VI requirements per U.S. Dept. of Energy, and also compliant to the Heavy Industrial
levels of various EN61000-4-x standards for EMC. The TE10A series models also meet Class B conducted and radiated EMI
per FCC Part 15, EN55022, CISPR22. Designed to allow easy integration with test and measurement equipment and other
industrial applications.
Model Selection
Model
Number
Output Output
Volts Current Power
Ripple &
Noise¹
Line
Load
Regulation Regulation
Output
Connector
Input
Configuration
TE10A0503F01 5.0V
2.0A
10W 75mV pk-pk
±1%
±5%
TE10A0603F01 5.9V
1.6A
10W 75mV pk-pk
±1%
±5%
2.5 x 5.5 x 9.5mm
Class I Desktop,
TE10A0703F01
TE10A1203F01
7.5V
12.0V
1.3A
1.0A
10W
12W
75mV pk-pk
120mV pk-pk
±1%
±1%
±5%
±5%
Straight Barrel Type,
center positive
IEC60320 C14
Receptacle
TE10A2403F01 24.0V 0.5A
12W 240mV pk-pk
±1%
±5%
TE10A0503N01 5.0V
2.0A
10W 75mV pk-pk
±1%
±5%
TE10A0603N01
TE10A0703N01
TE10A1203N01
5.9V
7.5V
12.0V
1.6A
1.3A
1.0A
10W
10W
12W
75mV pk-pk
75mV pk-pk
120mV pk-pk
±1%
±1%
±1%
±5%
±5%
±5%
2.5 x 5.5 x 9.5mm
Straight Barrel Type,
center positive
Class II Desktop,
IEC60320 C8
Receptacle
TE10A2403N01 24.0V 0.5A
12W 240mV pk-pk
±1%
±5%
TE10A0503Q01 5.0V
2.0A
10W 75mV pk-pk
±1%
±5%
TE10A0603Q01 5.9V
1.6A
10W 75mV pk-pk
±1%
±5%
2.5 x 5.5 x 9.5mm
Class II Desktop,
TE10A0703Q01 7.5V
TE10A1203Q01 12.0V
1.3A
1.0A
10W
12W
75mV pk-pk
120mV pk-pk
±1%
±1%
±5%
±5%
Straight Barrel Type,
center positive
IEC60320 C18
Receptacle
TE10A2403Q01 24.0V 0.5A
12W 240mV pk-pk
±1%
±5%
TE10A0503B01
TE10A0603B01
TE10A0703B01
TE10A1203B01
TE10A2403B01
5.0V
5.9V
7.5V
12.0V
24.0V
2.0A
1.6A
1.3A
1.0A
0.5A
10W
10W
10W
12W
12W
75mV pk-pk
75mV pk-pk
75mV pk-pk
120mV pk-pk
240mV pk-pk
±1%
±1%
±1%
±1%
±1%
±5%
±5%
±5%
±5%
±5%
2.5 x 5.5 x 9.5mm
Straight Barrel Type,
center positive
Class II Wall-Plug,
Interchangeable Blades
(North American Blade
included)²
TE10A0503C01 5.0V
2.0A
10W 75mV pk-pk
±1%
±5%
TE10A0603C01
TE10A0703C01
TE10A1203C01
5.9V
7.5V
12.0V
1.6A
1.3A
1.0A
10W
10W
12W
75mV pk-pk
75mV pk-pk
120mV pk-pk
±1%
±1%
±1%
±5%
±5%
±5%
2.5 x 5.5 x 9.5mm
Straight Barrel Type,
center positive
Class II Wall-Plug, Fixed
North American Blades³
TE10A2403C01 24.0V 0.5A
12W 240mV pk-pk
±1%
±5%
Notes: 1. Measured at the output connector, with noise probe directly across output and load terminated with 0.1μF ceramic and 10μF low ESR capacitors. For 5V and
6V models, values listed are typical, 100mV pk-pk maximum with 0.1μF ceramic and 47μF low ESR capacitors used at measurement point.
2. Order blade kit KT-1027K for other blades (EU. UK, Australia)
3. For EU fixed blades, replace “C” in the model number with “M”, for UK blades, replace “C” with “G”, for Australia blades, replace “C” with “H”.
4. For Input Class I models: For AC GND connected to output common (-), insert a “B” in the part number where the “A” is located (TE10B0503F01).
5. All specifications are typical at nominal input, full load, at 25°C ambient unless noted.
www.slpower.com
TE10 Rev 2.3 1-JAN-16
1