TB65_16 Datasheet, PDF (1/6 Pages) SL Power Electronics – 65W Single Output

TB65
65W Single Output
Test and Measurement/Industrial Series
Features
 2.0 x 3.5” x 1.3” Package
 Up to 65W Convection Cooled Output Power
 Compliant to high levels of EMC per EN61000-4
 15kV ESD (Air), 8kV (Contact)
 4kV Surge
 Meets Class B Conducted EMI with 6db margin,
Class B Radiated EMI with 3db margin
 Up to 90% Efficiency
 >10 year e-cap life
 Universal Input 90-264Vac Input Range
 DC OK Signal, PSU Temperature Signal
 Class I and II Input Models
 3 Year Warranty
Description
A Superior performance 65 Watts AC to DC power supply designed for Test and Measurement and Industrial applications. Feature
rich and highly efficient TB65 product family can easily fit in 1U chassis and provides 65 Watts, convection cooled. Input, output and
internal temperature monitoring/alarms are additional features of the TB65 family. All models are CE marked to low voltage
directive and approved to ITE standards of IEC/UL/EN60950 and CSA C22.2, 2nd edition.
Model Selection
Model
Number⁴
Output
Voltage (Nom)
TB65S12K
12V
Output
Current
5.4A
Efficiency¹
88%
Ripple & Noise²
(pk-pk)
120mV
Total
Regulation
±3%
OVP
Threshold
14.0 ± 1.1V
MTBF³
500,000
TB65S15K
15V
4.3A
88%
180mV
±3%
21.0 ± 2.0V
500,000
TB65S24K
24V
2.7A
90%
240mV
±3%
28.0 ± 2.5V
500,000
TB65S36K
36V
1.8A
88%
360mV
±3%
46.3 ± 3.0V
500,000
TB65S48K
48V
1.35A
90%
480mV
±3%
55.0 ± 4.0V
500,000
Notes:
1.
2.
3.
4.
Efficiency values listed are typical and are measured at 115Vac input, full load output current, at an ambient temperature of 25°C.
Measured at 25°C ambient with noise probe directly at end of 6” twisted pair terminated with 0.1μF ceramic and 10μF low ESR capacitors. Values will be higher at ambient
temperatures below 0°C.
MTBF values are in hours, per Telcordia 332, Issue 6, 25°C, full rated load (w/airflow) at 110Vac input.
Change the “K” suffix to “C” for Input Class II (ungrounded) models.
General Specifications
85-264Vac, single phase.
AC Input _{(Safety Approved to 90-264Vac).}
Turn On Time <2 Seconds at 110Vac.
Input Current 1.5A at 110Vac, 1A at 240Vac
Rise Time <30mS, 56V model: <35mS
40Arms Maximum within a half line cycle, cold
Inrush Current _{start at 25C. See application note.}
20mS min. from loss of AC input at 110 Vac, full load,
Hold-up Time _25°C.
I²T Characteristic See Table below.
Over Load 115% - 200% of rated output current value. Hiccup
Protection (OCP) Mode, Auto-recovery
www.slpower.com
TB65 REV 2.3 26-SEP-16
1