PENB1035B Datasheet, PDF (1/2 Pages) SL Power Electronics – Universal 56V, 35W (IEEE802.3at Compliant) PoE Gigabit

PENB1035B
Universal 56V, 35W (IEEE802.3at Compliant)
PoE Gigabit
3 Year Warranty
•10/100/1000 (MbPS) Data Rates
•Self-contained Injector
•100-240Vac Universal Input
•IEEE802.3at Compliant Detection, Disconnect,
Overload, and Overvoltage Control Function
•Load Diagnostic LEDs
•Overload Shutdown and Short Circuit Protection
•Regulated Output with Low Ripple
•Compliant to UL/IEC/EN60950-1
•LPS (Limited Power Source) Compliant
Description
The PENB1035 Series of Power-over-Ethernet (PoE) adapters operate from a 90 to 264Vac input range,
and provide up to 35W of output power at an output voltage of 56Vdc. These models are capable of
operating with Gigabit Data rates, and are available in IEEE802.3at compliant and non-compliant
versions. Features include power and diagnostic LEDs, and overvoltage, overload, and short circuit
protection.
Specifications
AC Input
Input Current
Inrush Current
Input Protection
Dialectric Withstand
Earth Leakage Current
Output Power
Ripple and Noise
Output Voltage
Total Regulation
Case Material
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
90-264Vac, 47-63 Hz single phase
1.5A @ 90Vac
0.75A @ 180Vac
60A peak, cold start
MTBF
Hold-Up Time
Efficiency
100K hours, calculated
10mS min. @ 115Vac, 60Hz
60mS min. @ 230Vac, 50Hz
See models’ chart
Internal Primary Fuse (3.15A/250V) provided Turn On Time
4242Vdc Primary – Secondary, 2,150Vdc
Primary – GND, 500Vdc Secondary - GND
<250µA @ 264Vac, 60Hz
Output Rise Time
Short Circuit Protection
2.0 sec max. @ 115Vac, 60Hz
2.0 sec max. @ 230Vac, 50Hz
100mS max. @ 115Vac, 60Hz
100mS max. @ 230Vac, 50Hz
10 minutes max @264Vac/60Hz
35W continuous, convection cooled Overvoltage Protection
Provided
See chart Operating Temperature
0° to +40°C
See chart Storage Temperature
-30° to +85°C
See chart Relative Humidity
5% to 95%, non-condensing
94V-0 Black Polycarbonate Altitude
0 to 10,000 ft
Dimensions
W: 2.13” x L: 5.24” x H: 1.38”. Weight: 180g Safety Standards
UL/IEC/EN60950-1, CE, CB
Models
Model
Number
PENB1035B5600F01
Output
Voltage
56Vdc
Output Current
Min Max
0A
0.6A
Ripple
& Noise¹
560mV pk-pk
Max.
Power
35W
Regulation
Line Load
±1%
±5%
AC Input
Receptacle²
IEC320, C14
Notes: 1. Measured at 20MHz bandwidth, with noise probe directly across output terminals, and load terminated with 0.1μF ceramic and
10μF low ESR electrolytic capacitors.
Input Receptacle Options:
"F" = IEC320
C14
Class I -
Gr ounde d
"Q" = IEC320
C18
Class II -
Ungr ounde d
"N" = IEC320
C8
Class II -
Ungr ounde d
______________________________________________________________________________________________________________________________ 1 of 2
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone [phone] • Fax [phone] • Email: [e-mail] • www.slpower.com