MINT3110_14 Datasheet, PDF (1/10 Pages) SL Power Electronics – 110W Triple Output Medical Series

Features
2” x 4” x 1.3” Package
Suitable for 1U Applications
Class I and Class II versions
110W w/air, 80W convection cooled
Universal Input 90-264Vac
Efficiency 87% typical
Approved to CSA/EN/IEC/UL60601-1, 3^rd
Edition
2 x MOPP Isolation
Power Fail Signal
Remote Sense (optional)
3 Year Warranty
RoHS Compliant
Description
The MINT3110 Series are medical grade, high efficiency, triple output power supplies in a small 2” x 4” size. The
MINT3110 family is ideal for medical applications in surgical and laboratory instruments requiring low leakage, multiple
outputs and small footprint. Surpassing the strict requirements of IEC 60601-1 3^rd edition, the MINT3110 models feature
outputs of 5/±12V, 5/±15V, 5/±24V, Power Fail/DC OK signal, very low earth leakage current of 200µA, Class B
Conducted EMI, 2 MOPP (means of patient protection) isolation, and are available in Class I and Class II configurations.
Model Selection
Model
Number
Volts*
V1
5V
Output Current**
w/200LFM air Convection
14.0A
10.0A
Ripple &
Noise***
1.0% pk-pk
Total
Regulation
±2%
OVP
Threshold
7.5V max.
MINT3110A0508K01
V2
12V
6.0A
4.5A
1.0% pk-pk
±3%
115%-135%
V3 -12V
1.0A
1.0A
2.0% pk-pk
±10%
115%-135%
V1
5V
14.0A
10.0A
1.0% pk-pk
±2%
7.5V max.
MINT3110A1708K01
V2
15V
4.5A
3.5A
1.0% pk-pk
±3%
115%-135%
V3 -15V
1.0A
1.0A
2.0% pk-pk
±10%
115%-135%
V1
5V
12.0A
8.0A
1.0% pk-pk
±2%
7.5V max.
MINT3110A1908K01
V2
24V
4.0A
3.0A
1.0% pk-pk
±3%
115%-135%
Notes:
V3 -24V
1.0A
1.0A
2.0% pk-pk
±10%
115%-135%
* 5V output is adjustable with +/-10% range
** Total convection power is 80 Watts.
*** Measured with noise probe directly across output terminals, and load terminated with 0.1µF ceramic and 10µF low ESR capacitors. Ripple & Noise of V2 at no
load is 2% maximum.
General Specifications
AC Input
100-240Vac, ±10%, 47-63Hz, 1∅
120–370Vdc
Less than 2 sec. @115Vac (inversely
Turn On Time proportional to input voltage and thermistor
temperature)
Input Current 115Vac: 1.5A, 230Vac: 0.75A
Hold-up Time 16mS typical at 110W, 120Vac input