MINT1175_15 Datasheet, PDF (1/8 Pages) SL Power Electronics – the highest power density for a power supply

MINT1175
175W Single Output
Medical Series
Features
2” x 4” x 1.3” Package
For 1U Applications
Class I and Class II versions
175W w/air, 120W convection cooled
Universal Input 90-264 VAC
Average Efficiency meets Level V
Requirements
Approved to CSA/EN/IEC/UL60601-1, 3^rd
Edition
2 x MOPP Isolation
12V fan output
Efficiency 90% typical at Full Load
3 Year Warranty
RoHS Compliant
Description
The MINT1175 Series models provide the highest power density for a power supply in a 2” x 4” size. Ideal for use in
Home Healthcare and Portable Medical Device Applications and more. With input & output monitoring alarms plus
isolated 12V/0.4A fan, it is one the most feature rich supplies and can easily fit in 1U chassis. Exceeding the medical
device strict requirements, the MINT1175 has the lowest earth leakage current with less than 200µA, satisfies 2MOPP
reinforced isolation requirements of IEC60601-1 3rd edition, and can be purchased as Class I or II configurations.
Model Selection
Model
Number
Output Current
Volts w/200LFM air Convection Fan Output
Ripple &
Noise**
Total
Regulation
MINT1175A1206K01
12V
14.6A
10.0A
12Vdc/0.4A
0.5%RMS,
1.2% pk-pk
±3%
MINT1175A1506K01
15V
11.7A
8.0A
12Vdc/0.4A
0.5%RMS,
1.0% pk-pk
±3%
MINT1175A2406K01
24V
7.3A
5.0A
12Vdc/0.4A
0.5%RMS,
1.2% pk-pk
±3%
MINT1175A4806K01
48V
3.6A
2.5 A
12Vdc/0.4A
0.5%RMS,
1.0% pk-pk
±3%
MINT1175A5606K01
56V
3.1A
2.1A
12Vdc/0.4A
0.5%RMS,
1.0% pk-pk
±3%
Notes:
* Total convection power is 120 Watts.
** Measured with noise probe directly across output terminals, and load terminated with 0.1µF ceramic and 10µF low ESR capacitors.
*** Output adjustment on 56V model will not exceed 56.2 volts.
OVP***
Threshold***
14.0 ± 1.1V
18.5 ± 1.5V
28.0 ± 2.5V
55.0 ± 4.0V
59.0 ± 1.0V
General Specifications
AC Input
100-240Vac, ±10%, 47-63Hz, 1∅
120–370Vdc
Less than 2 sec. @115Vac (inversely
Turn On Time proportional to input voltage and thermistor
temperature)
Input Current 115Vac: 2A, 230Vac: 1A
Hold-up Time 16mS, typical (120W output load)
www.slpower.com
MINT1175 REV 1.4, 5-AUG -15
1