MINT1150 Datasheet, PDF (1/8 Pages) SL Power Electronics – The MINT1150 family is a high power density for a power supply in a 2” x 4” size.

MINT1150
150W Single Output
Medical Series
Features
 2” x 4” x 1.3” Package
 For 1U Applications
 150W w/air, 100W convection cooled
 Universal Input 90-264 VAC
 Power Fail/Output Good Signal
 Approved to CSA/EN/IEC/UL60601-1,
3^rd Edition
 2 x MOPP Input to Output Isolation
 3 Year Warranty
 RoHS Compliant
Description
The MINT1150 family is a high power density for a power supply in a 2” x 4” size. Approved to EN/IEC/UL60601-1, 3rd
edition, with isolation levels which satisfy the 2 MOPP requirements. The MINT1150 family is ideal for Portable Medical
Devices, and many other applications where medical certifications, power density and cost are critical. The MINT1150
operates at universal input range of 90 to 264Vac and wide temperature range -10°C to +70°C, delivering full rated output
power up to +50°C. In addition, these models feature Power Fail and DC OK signals.
Model Selection
Model
Number
MINT1150A1206K01
Volts
12V
Output Current
w/200LFM air Convection*
12.5A
8.33A
Ripple &
Noise**
0.5%RMS, 1.2% pk-pk
Total
Regulation
5%
OVP
Threshold**
14.0  1.1V
MINT1150A1506K01
15V
10.0A
6.67A
0.5%RMS, 1.0% pk-pk
5%
18.0 ± 1.5V
MINT1150A2406K01
24V
6.25A
4.17A
0.5%RMS, 1.0% pk-pk
5%
28.0 ± 2.5V
MINT1150A4806K01
48V
3.13A
2.08A
0.5%RMS, 1.0% pk-pk
5%
55.0 ± 4.0V
MINT1150A5606K01
56V
2.68A
1.79A
0.5%RMS, 1.0% pk-pk
5%
<59.9V
Notes:
* Maximum output power is 95 Watts for input voltage of 90-105VAC at 50°C convection. For input voltage of 105Vac or more, the total power is
100 Watts at 50°C convection.
** Measured with noise probe directly across output terminals, and load terminated with 0.1μF ceramic and 10μF low ESR capacitors.
General Specifications
AC Input
100-240Vac, ±10%, 47-63Hz, 1
120–370Vdc
Less than 2 sec. @115Vac (inversely
Turn On Time proportional to input voltage and thermistor
temperature)
Input Current 115Vac: 2A, 230Vac: 1A
Hold-up Time >12mS at full load, 120Vac
Inrush Current 264Vac, cold start: will not exceed 50A
Signals AC Power Fail, DC OK
www.slpower.com
MINT1150 REV 1.4, 13-NOV-12
1