LES200SCD Datasheet, PDF (1/4 Pages) SL Power Electronics – 200W Single Output LED Driver Series

LE200S-CD
200W Single Output
LED Driver Series
Features
High Efficiency (up to 93%)
Wide Range Universal Input 90-305 VAC
Active Power Factor Correction (0.99 typical)
Constant Current Output
Dimming Function
Lightning Protection
Waterproof (IP67)
Overcurrent, Overvoltage, Overtemperature
Protection
Meets UL8750 & EN61347 Safety
Minimum of 3 Year Warranty, Consult factory
for 5 Years
Description
The LE200S-CD Series operate from a 90 ~ 305Vac input range. These units will provide up to a 0.7A of
output current and a maximum output voltage of 285Vdc for 200 W maximum output power. They are designed
to be highly efficient and highly reliable. The standard features include dimming control, lightning protection,
over voltage protection, short circuit protection, and over temperature protection.
Model Selection
Model
Output
Number
Current
Output
Voltage
Efficiency*
110Vac 220Vac
Ripple &
Noise**
Regulation
Line Load
Overvoltage
Trip Level
LE200S70CD
665mA-735mA 143V – 285V 90%-91% 92%-93% 8.6V pk-pk max. ±1%
±3%
342V – 428V
Notes:
1. Efficiency measured at full load, at input voltage noted.
2. Measured at 20MHz bandwidth, with noise probe directly across output terminals, and load terminated with 0.1µF ceramic and 10µF low ESR electrolytic
capacitors.
General Specifications
AC Input 90-305Vac, 47-63Hz, 1∅
Input Current 100Vac: 2.4A, 220Vac: 1.2A
Inrush Current 230Vac, cold start: will not exceed 65A
Input Fuses XA, 250VAC fuses provided on all models
Turn On Time 1.0 seconds, max.
Overload Constant Current
Protection
Dimming 1-10Vdc source or External Resistor can be
Function used for dimming control. See below.
www.slpower.com
LE200S-CD 15-APRIL-13
1