GSM11 Datasheet, PDF (1/2 Pages) SL Power Electronics – Low Power Medical Power Supplies 11 Watt AC/DC Universal Input Power Supply

GSM11 MEDICAL SERIES SINGLE OUTPUT  POWER SUPPLY
Low Power Medical Power Supplies 11 Watt AC/DC Universal Input Power Supply
• 85 - 264 Vac input range (100 - 240 Vac nominal)
• Overvoltage and short circuit protection
• Approved to UL, CSA and EN Standards
• Class II input
• RoHS Compliant (G suffix models)
SUMMARY
The GSM11 Series is an 11 W universal input AC/DC power supply
in an industry leading small footprint. With the medical approvals the
GSM11 is ideal for a variety of medical device applications includ-
ing small single board computers, battery charging, and running
small motors, pumps, and solenoids. The series, with full approval to
EN60601-1 and EN60950-1 Standards, improves design-in time and
reduces end system compliance costs.
All specifications are typical at nominal input, full load at 25 ^OC unless otherwise stated
SPECIFICATIONS
OUPUT SPECIFICATIONS
Output Power
Natural Convection
Total Regulation
Turn on time
Transient response
Main output 50%
0.2 A/ms
Temperature Coef-
ficient
Overvoltage protection
Short Circuit protection Power cycling
11 Watts
See table
2.0 s max.
5% max. dev. 1 ms recovery to
1%
+/-0.03%/oC
110 - 155%
135 % +/- 20 %
EMC INFORMATION
Conducted emissions EN55011
Radiated emissions EN55011
Line freq. harmonics EN61000-3-2
Voltage fluctuations EN61000-3-3
ESD Air
EN61000-4-2
ESD Contact
EN61000-4-2
Level B
Level A
Complies
Complies
8 kV air
4 kV contact
Radiated immunity
Fast Transients (EFT)
Line surge immunity
Conducted immunity
Power freq. mag. field
Voltage dip immunity
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
3 V/m
2 kV
1 kV differential
3 Vrms
3 A/m
5 cycles 40 % vnom 4.0 Watts.
25 cycles 70 % vnom 11 W
INPUT SPECIFICATIONS
Input Voltage range
Universal input
Input frequency
Input surge current
Input current
Input fuse
120 Vac
230 Vac
F1
100-240 nom (85 - 264 max)
Vac
55 Hz +/- 10 Hz
35 A max.
0.23 A
0.16 A
1.0 A
ENVIRONMENTAL SPECIFICATIONS
Thermal Performance
operating ambient
(see ratings chart)
non-operating
0 - 50 ^oC
Convection cooled
50 -70 ^oC ambient
Convection cooled
Relative Humidity
non-condensing
Maximum Altitude
operating / non-operating
Vibration
Shock
5 Hz- 500 Hz
per MIL-STD-810E
0-70 ^oC
-40 to +85 ^oC
11 Watts
derate to 50%
5% - 95% RH
10,000 ft. / 40,000
ft. max.
2.5 g rms
516.4 part IV