CPCI-204_DD Datasheet, PDF (1/4 Pages) SL Power Electronics – The CPCI series (ac input) and DPCI series (dc input) are highly reliable power supplies for CompactPCI systems, which are increasingly used in communications, industrial, military/aerospace, and other applications.

CPCI Series / DPCI Series 200 Watts
CompactPCI^® System Power Supplies
CPCI SERIES 200 Watts, Ac Input with PFC
DPCI SERIES 200 Watts, 48 Vdc Input
INPUT FAULT
CPCI200
3U x 8 HP
FEATURES:
• 200 W in 3U x 8HP,
EXECUTIVE MEMBER
• Fully compliant with PICMG CompactPCI^® specifications
• Current sharing and internal OR-ing diodes for N+1
redundancy
• High current 5 V and 3.3 V outputs
• CompactPCI^® package requires only 15 cfm of external
cooling air
• Universal ac input versions with power factor correction
• 48 Vdc input versions
CPQ400 (shown with optional interface board)
The CPCI series (ac input) and DPCI series (dc input) are highly reliable power supplies for CompactPCI systems, which are
increasingly used in communications, industrial, military/aerospace, and other applications. These power supplies offer high power
density in plug-in modules that meet the requirements of the PICMG^® power interface specification for CompactPCI systems.
These units may be used as a single power supply for a CompactPCI system, or multiple units may be used in parallel for higher
power capability as needed. In addition, all units include current sharing, internal OR-ing diodes, and a hot plug input/output connector
to offer full hot swap capability and N+1 redundancy. Also, compatible ac and dc input units offer standardization on a single power
supply series for a system mechanical configuration.
The CPQ400 is a power supply assembly that is made up of two CPCI/DCPI 204s. Two supplies are enclosed with a fan to provide an
alternative mounting configuration to the Compact PCI format. This is used for maximizing the number of a customers revenue slots by
relocating the power supply while still keeping the CPCI/DCPI electrical characteristics. These supplies can be used in parallel to
provide 400 watts of output power or as a 200 watt N +1 redundant power supply system. An optional interface board brings the input
and output connectors to convenient screw terminals and Molex type connectors. The individual model ratings depend on the specific
units chosen and you should refer to the standard CPCI/DCPI data sheets. When used as a single 400 watt unit, you can simply
double the single unit specifications.
AC INPUT
Model
CPCI-204-1203
Power Connector Output 1
Output 2
200 W 47 Pin 5.0 V @ 25 A 3.3 V @ 30A
Output 3
Output 4
12 V @ 5.5 A -12 V @ 0.5 A
Min. Load
on V1*
3.0 A
Max. Output
From V1 & V2
35 A
CPCI-204-1203 M 200 W DIN "M' 5.0 V @ 25 A 3.3 V @ 25 A 12 V @ 5.5 A -12 V @ 0.5 A 3.0 A
35 A
CPCI SERIES SPECIFICATIONS
AC INPUT: 90-264 Vac continuous range, 47 to 63 Hz.
POWER FACTOR: 0.99 typical at full load.
Meets EN61000-3-2 Class A.
INRUSH:
CPCI : Cold start ac current is less than 27 A at 115 Vac, and 50
A at 230 Vac. Limited by thermistor.
BROWNOUT PROTECTION: Holds regulation to 85 Vac
(30 seconds maximum)
HOLDUP TIME: 10 ms minimum after removal of power at full load.
EFFICIENCY: 70% typical.
EMI: CONDUCTED RFI
Meets FCC Part 15, Class A; EN55022 Class A.
FAIL# SIGNAL: TTL compatible signal. Signal goes low under
the following conditions: Outputs #1 or #2 fail; an overcurrent
condition on outputs #1, #2, or #3; an overtemperature shutdown;
an overvoltage shutdown; or an ac input failure (5 ms warning
before outputs shutdown).
DC INPUT
Model
DPCI-204-1203
DPCI-204-1203M
Power
200 W
200 W
Connector
47 Pin
DIN "M"
Output 1
Output 2
5 V @ 25 A 3.3 V @ 30 A
5 V @ 25 A 3.3 V @ 25 A
Output 3
12 V @ 5.5 A
12 V @ 5.5 A
Output 4
-12 V @ 0.5 A
-12 @ 0.5 A
Min. Load
on V1*
3.0 A
3.0 A
Max. Output
From V1 & V2
35 A
35 A
DPCI SERIES SPECIFICATIONS
DC INPUT: 36-72 Vdc
EFFICIENCY: 75% typical
FAIL# SIGNAL: TTL compatible signal. Signal goes low under
the following conditions: Any of 4 outputs fail; an overtemperature
shutdown; or an overvoltage shutdown.
Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033
100
800-235-5929 • 805-486-4565 • FAX [phone] • www.condorpower.com