CINT1175 Datasheet, PDF (1/8 Pages) SL Power Electronics – A highly dense 175Watts AC to DC power supply designed for industrial and ITE applications.

CINT1175
175W Single Output
Industrial Series
Features
 2” x 4” x 1.3” Package
 For 1U Applications
 175W w/air, 120W convection cooled
 Universal Input 90-264Vac
 Average Efficiency meets Level V
Requirements
 Approved to CSA/EN/IEC/UL60950, 2nd Edition
 12V fan output
 Efficiency 90% typical at Full Load
 3 Year Warranty
 RoHS Compliant
Description
A highly dense 175Watts AC to DC power supply designed for industrial and ITE applications. With convection rating of
120 Watts, CINT1175 family leads the market in power density and low leakage makes it a perfect solution for lighting
applications. With input & output monitoring alarms plus isolated 12V/0.4A fan, it is one the most feature rich supplies and
can easily fit in 1U chassis. All 5 models are CE marked to low voltage directive and approved to ITE standards of
EN60950, 2nd edition.
Model Selection
Model
Number
CINT1175A1206K01
Volts
12V
Output Current
w/200LFM air Convection
14.6A
11.7A
Fan Output
12Vdc/0.4A
Ripple &
Noise**
0.5%RMS,
1.2% pk-pk
Total
Regulation
3%
CINT1175A1506K01
15V
11.7A
9.3A
12Vdc/0.4A
0.5%RMS,
1.0% pk-pk
3%
CINT1175A2406K01
24V
7.3A
5.8A
12Vdc/0.4A
0.5%RMS,
1.2% pk-pk
3%
CINT1175A4806K01
48V
3.6A
2.9A
12Vdc/0.4A
0.5%RMS,
1.0% pk-pk
3%
CINT1175A5606K01
56V
3.1A
2.5A
12Vdc/0.4A
0.5%RMS,
1.0% pk-pk
3%
Notes: * Total convection power is 120 Watts.
** Measured with noise probe directly across output terminals, and load terminated with 0.1μF ceramic and 10μF low ESR capacitors.
*** Output adjustment on 56V model will not exceed 56.2 volts.
OVP***
Threshold***
14.0  1.1V
18.5 ± 1.5V
28.0 ± 2.5V
55.0 ± 4.0V
59.0 ± 1.0V
General Specifications
AC Input
100-240Vac, ±10%, 47-63Hz, 1
120–370Vdc
Input Current 115Vac: 2A, 230Vac: 1A
Less than 2 sec. @115Vac (inversely
Turn On Time proportional to input voltage and thermistor
temperature)
Hold-up Time 16mS, typical
Inrush Current 264Vac, cold start: will not exceed 50A
Signals AC Power Fail, DC OK
www.slpower.com
CINT1175 REV 5.4, 17-DEC-12
1