CENT1120 Datasheet, PDF (1/2 Pages) SL Power Electronics – ITE Switch-Mode Power Supply

CENT1120
Universal 120 Watt Series
ITE Switch-Mode Power Supply
•Universal Input 100Vac – 240Vac
•Single Output Models up to 120W
•Desktop Style/Non-vented case
•Efficiency Level IV
•Power Factor Correction
•Certified to UL/ EN60950
•IPX1 Rated Enclosure
•Complies with EMI/RFI Regulations
•Modified and Custom Designs Available
3 Year Warranty
Specifications
SACpeIncpiufitcations
90-264Vac, 47-63 Hz single phase MTBF
> 100K hours (calculated, 25°C at full load)
Input Current
90VAC: 2A, 180VAC: 1.0A Hold-up Time
16.7 ms min. @ 110VAC
Inrush Current
Inrush Current Protection Provided Overvoltage Protection
Latching
Input Fuse
Internal Primary Current Fuse Provided Overload Protection
>120% of full rated load, Hiccup Mode
Earth Leakage Current
Efficiency
Input-GND: <3.5mA, Normal State
Output-GND: <0.25mA, Normal State
88% typical
Short Circuit Protection
Overtemperature Protection
Hiccup Mode, auto-recovery
Latching
No Load Power
<0.5W Output Voltage
See chart
Input Harmonics
Meets IEC61000-3-2, class D Safety Standards
IEC/EN/UL60950
Transient Response
5ms return to within 1%, 50% load step.
0.2A/sec slew rate. Maximum deviation is 5%
Line/ Load Voltage Regulation Line: +/-2.0% max., Load: +/-5% max
Minimum Load
Not required
Topology
Two-Stage Conversion and Quasi-Resonant Flyback
Isolation
Input-Output: 3000VAC,
Input-GND: 1500VAC, Output-GND: 500VDC
Operating Temperature
0° to 40°C with no derating
Ripple and Noise
1% pk-pk max., 20MHz BW, differential mode Temperature Coefficient
0.3% per °C, maximum
Turn-on Time
3 sec. maximum @ 115VAC Storage Temperature
-20°C to +85°C
Case Material
Black 94V-0 rated Polycarbonate Relative Humidity
5% to 95%, non-condensing
Case Dimensions/Output Connections See chart and outline drawing Altitude
0 to 10,000 ft, operating; -500 to 40,000 ft, non-operating
Model Number Key
CENT 1 120 A VV 51 F 01
Model
"01" = Standard. "02" and higher indicates a m odified m odel.
Input Connector: "F" = IEC320 C14 grounded, Other options available, see below
Output Connector: "51" = 6 pin Molex. Other options available.
Output Voltage: "09" = 9Vdc, "12" = 12Vdc, "24" = 24Vdc, etc.
Model
"A" = Original Configuration
Output Pow er:
"120" = 120 Watts
# of Outputs
"1" = Single Output
Product Fam ily: "C" = Com m ercial/ITE/Industrial, "E" = External, "NT" = New Technology
______________________________________________________________________________________________________________________________ 1 of 2
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone [phone] • Fax [phone] • Email: [e-mail] • www.slpower.com