CENB1010 Datasheet, PDF (1/3 Pages) SL Power Electronics – ITE Switch-Mode Power Supply

CENB1010
Universal 10 Watt Series
ITE Switch-Mode Power Supply
•100-240VAC Universal Input Range
•Meets EISA2007, CEC Efficiency Level V,
EU (EC) No 278/2009 Phase II
•Desktop & Wall Plug Styles
•5V to 48V Single Output Models, up to 12W
•Modified and Custom Designs Available
•Regulated Output with Low Ripple
•Impact-Resistant Polycarbonate Enclosure
•No load Power Consumption <0.3W
•Limited Power Source
•Certified to UL/EN/IEC60950-1, 2^nd Edition
3 Year Warranty
RoHS LPS
Specifications
All Specifications are typical at nominal input, full load at 25C unless otherwise stated.
AC Input
Input Current
Inrush Current
100-240VAC, -/-10%, 47-63 Hz, 1
100Vac: 0.27A
60 A peak max at 264 Vac
MTBF
Hold-up Time
Overload Protection
>100,000 hours (calculated)
18 ms min. @ 115Vac, 60 ms min. @ 230 Vac
Hiccup Mode
Input Fuse Internal Primary Current Fuse provided (1A, 250Vac rated) Short Circuit Protection
Hiccup Mode
Efficiency
Output Voltage
Meets EISA2007, CEC Efficiency Level V,
EU (EC) No 278/2009 Phase II
See chart
Topology
Safety Standards
Switching – Fixed Frequency Flyback
EN/IEC/CSA/UL60950-1, 2^nd Edition, LPS
Output Power
Ripple and Noise
See chart
1% pk-pk max., 20MHz BW
Line & Load Voltage Regulation
Line: +/- 1%, Load: +/-5%
Minimum Load
Not required
Case Material
Black 94V-0 Polycarbonate
Case Dimensions
84 x 47 x 32mm. See outline drawing
Weight
110g
EMC, Radiated & Conducted
See Chart below
Dielectric Withstand
Input-Output: 4,242Vdc,
Input-Ground: 1,500 Vac, Output-Ground: 500 Vdc
Operating Temperature
0 to 40C, no derating
Storage Temperature
-30 to +85C
Relative Humidity
5% to 95%, non-condensing
Altitude
0 to 10,000 ft
Output Cable
#20AWG (UL2468), 1500mm, 2 conductor
Output Connector
2.5mm barrel type (Ault #3), center contact (+)
Other options available, contact the factory for details
Conducted Emissions
Radiated Emissions
Line Frequency Harmonics
Voltage Fluctuations/Flicker
Static Discharge Immunity
Radiated RF Immunity
EFT/Burst Immunity
Line Surge Immunity
Conducted RF Immunity
Power Frequency Magnetic Field Immunity
Voltage Dip Immunity
EMC Specifications
EN55022 Class B, FCC Part 15, Class B.
EN55022 Class B, FCC Part 15, Class B.
EN61000-3-2, Class A
EN61000-3-3
EN61000-4-2, 6kV Contact Discharge, 8kV air discharge
EN61000-4-3, 3V/m.
EN61000-4-4, 2kV/5kHz.
EN61000-4-5, 1kV differential, 2kV common-mode
EN61000-4-6, 3Vrms
EN61000-4-8, 3A/m
EN61000-4-11, Criteria B
________________________________________________________________________________________________________________________________ 1 of 3
SL Power Electronics Corp  6050 King Drive Ventura, CA 93003  Phone [phone]  Fax [phone]  Email: [e-mail]  www.slpower.com