SKY85608-11 Datasheet, PDF (6/9 Pages) Skyworks Solutions Inc. – 5 GHz, 802.11ac Switch-Low-Noise Amplifier

DATA SHEET • SKY85608-11: WLAN SWITCH/LNA FEM
1.40
0.50
0.40
0.40 Typ
1.20
0
0
0.40
0.20 Typ
0.20 Typ
Board Metal
3X Ø0.203
Via Pattern
(Note 4)
1.50
1.40
0.40
0.25
0.40 Typ
1.10
0.40 Typ
0.30 Typ
0.20 Typ
0.30 Typ
Package Outline
0.20 Typ
Solder Mask Pattern
(Note 6)
Notes:
Stencil Pattern
(Note 5)
1. All dimensions are in millimeters
2. Dimensions and tolerances according to ASME Y14.5M-1994
3. Unless specified, dimensions are symmetrical about center lines.
4. Via hole recommendations: 0.025 mm Cu via wall plating (minimum),
via holes to be filled with conductive paste and plated over.
5. Stencil recommendations: 0.10 mm stencil thickness, laser cut
apertures, trapezoidal walls and rounded corners offer better paste release.
6. Solder mask recommendations: contact board fabricator for recommended
solder mask offset and tolerance.
Figure 5. SKY85608-11 PCB Layout Footprint
0.95
54% Solder Coverage
on Center Pad
Y0496
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
6
July 13, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202959I