SKY67101-396LF Datasheet, PDF (6/12 Pages) Skyworks Solutions Inc. – SKY67101-396LF 0.4-1.2 GHz High Linearity, Active Bias Low-Noise Amplifier

DATA SHEET • SKY67101-396LF HIGH LINEARITY, ACTIVE BIAS LNA
Evaluation Board Description
The SKY67101-396LF Evaluation Board is used to test the
performance of the SKY67101-396LF LNA. An assembly drawing
for the Evaluation Board is shown in Figure 15. An Evaluation
Board schematic diagram is provided in Figure 16. Table 4
provides the Bill of Materials (BOM) list for Evaluation Board
components.
The test board uses a 10 mil Rogers 4350B substrate on a 50 mil
FR4 supporting substrate. The Rogers 4350B material was
selected for the RF circuit because of its low dielectric constant
(εr) and low εr variation over temperature for the best possible
noise performance.
Package Dimensions
The PCB layout footprint for the SKY67101-396LF is provided in
Figure 17. Typical case markings are shown in Figure 18.
Package dimensions for the 8-pin DFN are shown in Figure 19,
and tape and reel dimensions are provided in Figure 20.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
THE SKY67101-396LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 °C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Figure 15. SKY67101-396LF Evaluation Board Assembly Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
6
June 2, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201266H