SKY13399-468LF Datasheet, PDF (6/11 Pages) Skyworks Solutions Inc. – 10 to 2700 MHz DPx3T Switch

DATA SHEET • SKY13399-468LF: DPX3T SWITCH
Evaluation Board
The SKY13399-468LF Evaluation Board is used to test the
performance of the SKY13399-468LF DPx3T Switch. An
Evaluation Board schematic diagram is provided in Figure 9. An
assembly drawing for the Evaluation Board is shown in Figure 10.
Package Dimensions
The PCB layout footprint for the SKY13399-468LF is provided in
Figure 11. Typical part markings are shown in Figure 12. Package
dimensions are shown in Figure 13, and tape and reel dimensions
are provided in Figure 14.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SKY13399-468LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
RFA
VDD
V2
V1
RF3B
RF3A
RF2A
14
13
12
11
10
15
VCTL_2
16
VCTL_1
17
OUTPUT_3B
18
OUTPUT_3A
9
GND
8
GND
7
OUTPUT_1A
6
OUTPUT_1B
1
2
3
4
5
Figure 9. SKY13399-468LF Evaluation Board Schematic
RFB
RF1A
RF1B
RF2B
S2774
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
6
September 25, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201624G