AA101-80_07 Datasheet, PDF (6/7 Pages) Skyworks Solutions Inc. – GaAs IC 5-Bit Digital Attenuator 1 dB LSB Positive Control 0.5-2.5 GHz

DATA SHEET • AA101-80, AA101-80LF
60
58
56
85 °C
54
52
-40 °C
50
48
46
25 °C
44
42
40
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
Attenuation (dB)
IP3 vs. Attenuation and Temperature
Truth Table
V₁
V₂
V₃
16 dB 8 dB 4 dB
V_HIGH
V_HIGH
V_HIGH
V_HIGH
V_HIGH
0
0
V_HIGH
V_HIGH
V_HIGH
V_HIGH
0
V_HIGH
0
V_HIGH
V_HIGH
V_HIGH
0
V_HIGH
V_HIGH
0
V_HIGH = 3 to 5 V (V_S = V_HIGH ± 0.2 V).
V₄
2 dB
V_HIGH
V_HIGH
0
V_HIGH
V_HIGH
V_HIGH
0
V₅
1 dB
V_HIGH
0
V_HIGH
V_HIGH
V_HIGH
V_HIGH
0
Attenuation
J₁–J₂
Reference I.L.
1 dB
2 dB
4 dB
8 dB
16 dB
31 dB max. atten.
Absolute Maximum Ratings
Characteristic
Value
RF input power
2 W > 500 MHz 0/8 V
0.75 W @ 50 MHz 0/8 V
Supply voltage
8V
Control voltage
-0.2 V, +8 V
Operating temperature
-40 °C to +85 °C
Storage temperature
-65 °C to +150 °C
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Compression Point vs. Attenuation,
Voltage, and Temperature
Attenuation
State
Ins. loss
1
2
4
8
16
31
Control
Voltage (V)
3
3
3
3
3
3
3
Input Power @ 1 dB Compression
25 °C (dBm) 85 °C (dBm) -40 °C (dBm)
23.1
23.3
24.3
23.5
23.3
24.2
22.7
22.7
23.7
33.8
33.2
33.8
31.7
31.7
22.7
20.2
20.5
21.4
21.9
20.6
23.6
SSOP-16
0.025
(0.635 mm) Typ.
Pin 16
0.244 (6.20 mm)
0.228 (5.80 mm)
0.197 (5.00 mm)
0.189 (4.80 mm)
0.158 (4.00 mm)
0.150 (3.80 mm)
Pin 1
0.068
(1.73 mm) Max.
R 0.008
Min.
0.0196 X 45˚
Chamfer
R 0.013/
0.008
0.010
(0.25 mm)
Typ.
0.010 (0.25 mm)
0.004 (0.10 mm)
5˚ -15˚
0.050 (1.27 mm)
0.016 (0.40 mm)
0.0098
(0.25 mm)
8˚ Max.
Recommended Solder Reflow Profiles
Refer to the “Recommended Solder Reflow Profile”
Application Note.
Tape and Reel Information
Refer to the “Discrete Devices and IC Switch/Attenuators
Tape and Reel Package Orientation” Application Note.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
6
February 21, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200198 Rev. D