SKY73012-11 Datasheet, PDF (5/25 Pages) Skyworks Solutions Inc. – SKY73012 400 – 3900 MHz Direct Quadrature Demodulator

DATA SHEET • SKY73012 DEMODULATOR
Table 4. SKY73012 Electrical Characteristics (2 of 3)
(VCC = 3 V, IF = 10 MHz, LO Input Power = 0 dBm, TC = 25 °C, unless otherwise noted)
Parameter
Symbol
Test Conditions
Min
Typical
Max
Units
3600 MHz RF Input (Note 2)
Voltage conversion gain
Power conversion gain
SSB Noise Figure
NF
2^nd Order Input Intercept Point (Note 3)
IIP2
3^rd Order Input Intercept Point (Note 3)
IIP3
–0.5
dB
–11.5
–10.5
dB
19.0
20.5
dB
44
50
dBm
19.0
21.5
dBm
Input 1 dB compression
11.5
12.5
dBm
RF input VSWR
With external matching
1.5:1
components, ZO = 50 Ω
LO input VSWR
With external matching
3.0:1
components, ZO = 50 Ω
IF output noise floor
–165
dBm/Hz
RF to LO isolation
58
dB
LO to IF isolation
24
dB
Note 1: Differential IFI and IFQ output impedance without the use of a 9:1 impedance ratio balun.
Note 2: The recommended LO input power level can vary from –3 dBm to +3 dBm for the 900, 1900, and 2600 MHz RF input frequencies. Above 3300 MHz, better performance is achieved by
using a higher LO input power level such as +5 dBm.
Note 3: When a +5 dBm LO input power level is applied at 3600 MHz, the typical IIP2 value is 51 dBm and the typical IIP3 value is 22.5 dBm.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
200473B • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • January 12, 2007
5