SKY13585-679LF Datasheet, PDF (5/9 Pages) Skyworks Solutions Inc. – 1.0 to 6.0 GHz SPDT Switch

DATA SHEET • SKY13585-679LF: 2.4 TO 6.0 GHz SPDT SWITCH
Evaluation Board Description
The SKY13585-679LF Evaluation Board is used to test the
performance of the SKY13585-679LF SPDT Switch. An Evaluation
Board schematic diagram is provided in Figure 7. An assembly
drawing for the Evaluation Board is shown in Figure 8.
Package Dimensions
The PCB layout footprint for the SKY13585-679LF is provided in
Figure 9. Typical part markings are shown in Figure 10. Package
dimensions are shown in Figure 11, and tape and reel dimensions
are provided in Figure 12.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SKY13585-679LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
RF Output
Port 1
RF Output
Port 2
1 _OUTPUT1
2 _GND
3 _OUTPUT2
VDD ⁶
INPUT ⁵
VCTL ⁴
DC Supply
Antenna
Control Voltage
203458-003
Figure 7. SKY13585-679LF Evaluation Board Schematic
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
203458F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 19, 2016
5