SKY13320-374LF Datasheet, PDF (5/9 Pages) Skyworks Solutions Inc. – 0.1-6.0 GHz GaAs SPDT Switch

DATA SHEET • SKY13320-374LF SPDT SWITCH
Evaluation Board Description
The SKY13320-374LF Evaluation Board is used to test the
performance of the SKY13320-374LF SPDT Switch. An Evaluation
Board schematic diagram is provided in Figure 6. An assembly
drawing for the Evaluation Board is shown in Figure 7.
Package Dimensions
The PCB layout footprint for the SKY13320-374LF is provided in
Figure 8. Typical case markings are shown in Figure 9. Package
dimensions for the 6-pin MLPD are shown in Figure 10, and tape
and reel dimensions are provided in Figure 11.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SKY13320-374LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 qC. It can be used for lead or lead-free soldering.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format. For packaging details, refer to the Skyworks
Application Note, Discrete Devices and IC Switch/Attenuators
Tape and Reel Package Orientation, document number 200083.
DC Control
Voltage (1.8-5.0 V)
RF Common
Input
DC Control
Voltage (1.8-5.0 V)
1 _V1
C_BL
2 _RFC
3 _V2
C_BL
J1 ⁶
GND ⁵
J2 ^{4 CBL}
C_BL = 47 pF for >1 GHz operation.
Exposed ground paddle should be grounded
for best performance.
Figure 6. SKY13320-374LF Evaluation Board Schematic
RF Output
RF Output
S1545
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
201097C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 20, 2009
5