SKY12232-21 Datasheet, PDF (5/10 Pages) Skyworks Solutions Inc. – High IIP3 2.65-3.65 GHz Voltage-Controlled Variable Attenuator

DATA SHEET • SKY12232-21 VARIABLE ATTENUATOR
Figure 7. Input Return Loss vs Frequency Over Control Voltage
Figure 8. Output Return Loss vs Frequency Over Control Voltage
Evaluation Board Description
The SKY12232-21 Evaluation Board is used to test the
performance of the SKY12232-21 variable attenuator. An
assembly drawing for the Evaluation Board is shown in Figure 9.
The Evaluation Board layer detail is shown in Figure 10.
The attenuation level of the SKY12232-21 is controlled by
applying 0 to 5 V to the V_CONTROL pins.
Package Dimensions
The PCB layout footprint for the SKY12232-21 is shown in
Figure 11. Typical case markings are shown in Figure 12.
Package dimensions for the 8-pin MCM are shown in Figure 13,
and tape and reel dimensions are provided in Figure 14.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
THE SKY12232-21 is rated to Moisture Sensitivity Level 1 (MSL1)
at 260 °C. It can be used for lead or lead-free soldering. For
additional information, refer to the Skyworks Application Note,
PCB Design & SMT Assembly/Rework Guidelines for MCM-L
Packages, document number 101752.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
201930D • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • January 14, 2013
5