SKY65720-11 Datasheet, PDF (4/8 Pages) Skyworks Solutions Inc. – Innovative proprietary shielded technology

DATA SHEET • SKY65720-11: SHIELDED LOW-NOISE AMPLIFIER FEM WITH GPS/GNSS/BDS FILTER
Evaluation Board
An Evaluation Board is used to test the performance of the
SKY65720-11 device. A schematic of the Evaluation Board is
provided in Figure 3. An assembly diagram of the Evaluation
Board is shown in Figure 4.
Package Dimensions
The PCB layout footprint for the SKY65720-11 is provided in
Figure 5. The typical part marking is shown in Figure 6. Package
dimensions are shown in Figure 7, and tape and reel dimensions
are provided in Figure 8.
Package and Handling Information
Since the device package is sensitive to moisture absorption, it is
baked and vacuum packed before shipping. Instructions on the
shipping container label regarding exposure to moisture after the
container seal is broken must be followed. Otherwise, problems
related to moisture absorption may occur when the part is
subjected to high temperature during solder assembly.
The SKY65720-11 is rated to Moisture Sensitivity Level 3 (MSL3)
at 260 C. It can be used for lead or lead-free soldering. For
additional information, refer to the Skyworks Application Note,
PCB Design & SMT Assembly/Rework Guidelines for MCM-L
Packages, document number 101752.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
J1
SMA
RF IN
VEN
J3
1 2 34 5
VCC _GND VEN
GND
GND
50 Ω trace
1 _{RF_IN}
2 _GND
3
VEN
4
GND
5 _GND
9
RF_OUT
GND ⁸
VCC ⁷
6
GND
50 Ω trace
J2
SMA
RF OUT
VCC
203571-003
Figure 3. SKY65720-11 Evaluation Board Schematic
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
4
July 15, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203571D