SKY66108_11 Datasheet, PDF (3/13 Pages) Skyworks Solutions Inc. – 2.0 V to 3.6 V supply operation

DATA SHEET • SKY66108-11: 2.4 GHz SMART ENERGY/ZIGBEE FRONT-END MODULE
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY66108-11 are provided
in Table 2. The recommended operating conditions are specified
in Table 3.
The electrical specifications are provided in Tables 4 through 7.
The state of the SKY66108-11 is determined by the logic provided
in Table 8.
Table 2. SKY66108-11 Absolute Maximum Ratings
Parameter
Symbol
Minimum
Maximum
Units
Supply voltage
VCC1, VCC2, VCC3
–0.3
3.6
V
Control pin voltages
–0.3
3.6
V
Operating temperature
TA
–40
125
C
Storage temperature
Tx output power at the ANT port into 50 Ω load
TSTG
POUT_TX_MAX
–40
125
C
+16
dBm
Tx input power at the TR port
PIN_TX_MAX
+6
dBm
Rx input power at the ANT port
Thermal resistance
PIN_RX_MAX
θJC
+5
dBm
69
C/W
Electrostatic discharge:
ESD
Human Body Model (HBM), Class 1C
1000
V
Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 3. Recommended Operating Conditions
Parameter
Symbol
Ambient temperature
TA
Supply voltage for transceiver core
VB_IN
Supply voltage on Vcc pins
VCC1, VCC2, VCC3
Minimum
–40
1.6
2.0
Typical
+25
3.0
Maximum
+125
3.6
3.6
Units
C
V
V
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
202969B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 16, 2015
3