SKY13415-485LF Datasheet, PDF (3/11 Pages) Skyworks Solutions Inc. – 0.1 to 3.8 GHz SP5T Antenna Switch

DATA SHEET • SKY13415-485LF: SP5T SWITCH
Table 2. SKY13415-485LF Absolute Maximum Ratings¹
Parameter
Symbol
Min
Max
Units
Supply voltage
VDD
2.5
5.0
V
Control voltage (V1, V2, and V3)
VCTL
–0.5
+3.0
V
RF input power (RF1 to RF5):
PIN
0.1 to 2.7 GHz (RF1 to RF5 arm)
3.4 to 3.8 GHz (RF2 to RF5 arm)
+37.5
dBm
+35
dBm
RF power applied to antenna in the 50 Ω switched RF output state
PIN
+27
dBm
Operating temperature
TOP
–40
+85
C
Storage temperature
TSTG
–55
+150
C
Electrostatic discharge:
ESD
Human Body Model (HBM), Class 1C
1000
V
1 _{Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters}
set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device.
This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce
potentials of several kilovolts on the human body or equipment, which can discharge without detection.
Industry-standard ESD handling precautions should be used at all times.
Functional Description
The SKY13415-485LF includes an internal negative voltage
generator and decoder that eliminate the need for external DC
blocking capacitors on the RF ports. No external components are
required for proper operation. DC decoupling capacitors may be
added on the VDD and control lines if necessary.
Switching is controlled by three control voltage inputs, V1, V2, and
V3. Depending on the logic voltage level applied to the control
pins, the antenna pin is connected to one of five switched RF
outputs or a 50 Ω termination.
Shutdown mode is enabled by connecting all three control pins
(V1, V2, and V3) to logic high. This mode reduces the overall
current consumption of the device to 5 μA typical.
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY13415-485LF are
provided in Table 2. Electrical specifications are provided in
Table 3.
The state of the SKY13415-485LF is determined by the logic
shown in Table 4.
The isolation matrix shown in Table 5 provides the port-to-port
and antenna-to-port isolation for all available RF states at four
different frequencies: 1.0 GHz, 2.0 GHz, 2.7 GHz, and 3.8 GHz.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
201704I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 30, 2016
3