SKY13373-460LF_15 Datasheet, PDF (3/9 Pages) Skyworks Solutions Inc. – 0.1 to 6.0 GHz SP3T Switch

DATA SHEET • SKY13373-460LF: 0.1 TO 6.0 GHz SP3T SWITCH
Table 3. SKY13373-460LF Electrical Specifications (Note 1)
(VDD = 2.3 V to 4.8 V, V1 = V2 = 0 to 1.8 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typical
Max
Units
RF Specifications
Insertion loss
IL
0.8 to 1.0 GHz
1.0 to 2.2 GHz
2.2 to 3.0 GHz
4.9 to 6.0 GHz
0.35
0.40
dB
0.40
0.55
dB
0.50
0.60
dB
0.80
1.00
dB
Isolation
ISO
0.8 to 1.0 GHz
35
40
dB
1.0 to 2.2 GHz
28
33
dB
2.2 to 3.0 GHz
25
30
dB
4.9 to 6.0 GHz
18
22
dB
Return loss
|S11|
0.8 to 6.0 GHz
17
dB
Third order input intercept point
IIP3
0.8 to 3.0 GHz,
+65
+70
dBm
ΔF = 1 MHz,
PIN = +20 dBm/tone
Input 0.1 dB compression point
P0.1dB
0.8 to 6.0 GHz,
+39
dBm
RFC to J1, J2, and J3
2^nd harmonic
2fo
0.8 to 3.0 GHz,
PIN = +20 dBm
+85
dBc
3^rd harmonic
3fo
0.8 to 3.0 GHz,
PIN = +20 dBm
+85
dBc
Switching rise time
10/90% RF
250
ns
Switching fall time
90/10% RF
250
ns
Switching on time
Switching off time
Startup time
50% VCTL to 10/90% RF
1500
ns
50% VCTL to 90/10% RF
1500
ns
Shutdown state to any RF
switch state
20
μs
DC Specifications
Control voltage:
High
Low
Supply voltage
Supply current
Control current
VCTL_HIGH
VCTL_LOW
VDD
IDD
Ictl
VDD = 3.5 V
V1 = V2 = 1.8 V
1.65
1.80
3.00 (Note 2)
V
0
0.4
V
2.5
4.8
V
60
μA
2
μA
Shutdown mode supply current
Ioff
VDD = 3.5 V,
V1 = V2 = 0 V
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Note 2: Control voltage should not exceed supply voltage.
5
μA
Table 4. SKY13373-460LF Truth Table
V1
(Pin 4)
V2
(Pin 5)
State
0
0
Shutdown
1
0
RFC to J2
0
1
RFC to J1
1
1
RFC to J3
Note: 1 = 1.65 to 3.30 V; 0 = 0 to 0.4 V. Any state other than described in this Table places the switch into an undefined state.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
201264M • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 16, 2015
3