English
Language : 

SKY13286-359LF_09 Datasheet, PDF (3/9 Pages) Skyworks Solutions Inc. – 0.1-6.0 GHz High Isolation SPDT Absorptive Switch
DATA SHEET • SKY13286-359LF SPDT ABSORPTIVE SWITCH
Table 2. SKY13286-359LF Absolute Maximum Ratings
Parameter
Symbol
Minimum
Typical
Maximum
Units
Supply voltage
VDD
2.7
5.5
V
RF input power @ >500 MHz
VI
1
W
Operating temperature
TOP
–40
+95
°C
Storage temperature
TSTG
–65
+150
°C
Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 3. Recommended Operating Conditions
Parameter
Symbol
Test Condition
Min
Typical
Max
Units
Switching characteristics:
Rise, fall
On/off
Video feedthrough
10/90% or 90/10% RF
30
ns
50% control to 90/10% RF
50
ns
TRISE = 3 ns,
measurement bandwidth
= 500 MHz
25
mV
Input power for 1 dB compression
PINPUT
VDD = 3V, 0.7-2.0 GHz
+23
dBm
VDD = 5 V, 0.7-2.0 GHz
+26
+30
dBm
3rd Order Intercept Point
IP3
For 2-tone input power,
+8 dBm/tone, 1 MHz
spacing:
VDD = 3.3 V, 0.7-1.0 GHz
+49
dBm
VDD = 5.0 V, 0.7-1.0 GHz
+45
+47
dBm
VDD = 3.3 V, 1.0-2.0 GHz
+43
dBm
VDD = 5.0 V, 1.0-2.0 GHz
+45
+46
dBm
Control voltage (Note 1):
Low
High
VCTL_LOW
VCTL_HIGH
0
0.5
V
2.7
VDD
V
Supply current
VDD = 5 V
100
μA
Control current
VCTL = low or high
5
μA
Supply voltage
2.7
5.0
V
Note 1: VDD must be applied before a VCTL high signal. A latch-up condition may occur if a logic high signal is applied before the VDD voltage. Control voltages switch the VDD voltage to the
GaAs switch.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200570E • Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice • July 30, 2009
3