SKY12207-478LF Datasheet, PDF (3/18 Pages) Skyworks Solutions Inc. – SKY12207-478LF 0.9-4.0 GHz 50 W High Power Silicon PIN Diode SPDT Switch

DATA SHEET • SKY12207-478LF 50 W PIN DIODE SPDT SWITCH
Table 2. SKY12207-478LF Absolute Maximum Ratings
Parameter
Symbol
Minimum
Maximum
Units
RF CW input power, TX and ANT ports (TSUBSTRATE = 25 °C)
PIN
75
W
RF peak input power, TX and ANT ports (TSUBSTRATE = 25 °C, RF burst PIN
width = 10 μs, RF burst repetition rate = 250 kHz)
300
W
RF CW input power, RX port (TSUBSTRATE = 25 °C)
PIN
60
W
RF peak input power, RX port (TSUBSTRATE = 25 °C, RF burst width = PIN
10 μs, RF burst repetition rate = 10 kHz)
100
W
Control port reverse voltage
VCTL
200
V
Control port forward current
ICTL
200
mA
Operating temperature
TOP
–55
+175
°C
Storage temperature
TSTG
–55
+200
°C
Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 3. Recommended Operating Conditions (Per ANT, TX, RX, and RX_BIAS Inputs)
Parameter
Symbol
Min
Typical
Max
Units
Control port reverse voltage
VCTL
5
28
100
V
Control port forward current
ICTL
20
50
100
mA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
201678C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 14, 2013
3