RFX8051B Datasheet, PDF (3/6 Pages) Skyworks Solutions Inc. – CMOS 5GHz WLAN 802.11ac RFeIC WITH PA, LNA AND SPDT

ABSOLUTE MAXIMUM RATINGS:
Parameters
DC VDD Voltage Supply
DC Control Pin Voltage
DC VDD Current
Consumption
TX RF Input Power
ANT RF Input Power
ANT RF Input Power
Junction Temperature
Storage Ambient
Temperature
Operating Ambient
Temperature
Moisture Sensitivity
Units Min
V
0
V
0
mA
dBm
dBm
dBm
o_C
o_C
-40
o_C
-40
RFX8051B
Production Data Sheet
Max
3.9
3.6
400
+7
+20
+5
150
+150
+85
Conditions
All VDD Pins
All Control Pins
Through VDD Pins when TX is “ON”
Bypass Mode
RX Mode
Appropriate care required according to
JEDEC Standards
MSL1
Note: Sustained operation at or above the Absolute Maximum Ratings for any one or combinations of the above
parameters may result in permanent damage to the device and is not recommended.
All Maximum RF Input Power Ratings assume 50-Ohm terminal impedance.
NOMINAL OPERATING CONDITIONS:
Parameters
Units Min Typ Max
DC VDD Voltage Supply (Note 1)
V
3.0
3.3
3.6
Control Voltage “High” (Note 2)
V
1.2
3.3
Control Voltage “Low”
V
0
0.3
DC Control Pin Current
Consumption
μA
1
DC Shutdown Current
μA
3
PA Turn On/Off Time
μsec
0.4
LNA Turn On/Off Time
μsec
0.4
Shut-Down and “ON” State
Switching Time
μsec
0.4
RF Port Impedance
ohms
50
ja (Note3)
o_C/W
46
jc
o_C/W
19
Conditions
All VDD Pins
TX, RX, ANT – VDD Applied
Note 1: For normal operation of the RFX8051B, VDD must be continuously applied to all VDD supply pins.
Note 2: If control voltage can exceed 1.8V, a 10KΩ series resistor is recommended for the application circuit on each
control line.
3
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com