RFX242 Datasheet, PDF (3/6 Pages) Skyworks Solutions Inc. – 2.4GHz High Power 802.11ac WLAN Linear Power Amplifier

RFX242
Advanced Data Sheet
ABSOLUTE MAXIMUM RATINGS
Parameters
DC VDD Voltage Supply
DC Control Pin Voltage
DC VDD Current Consumption
TX RF Input Power
ANT RF Input Power
Junction Temperature
Storage Ambient Temperature
Operating Ambient Temperature
ESD Voltage (HBM)
Min
0
0
-50
-40
1000
Max Units
6.0
V
3.6
V
800 mA
+10 dBm
+10 dBm
150
°C
+150 °C
+85
°C
V
Conditions
All VDD Pins
All Control Pins
VDD Pins when PA is Enabled
Appropriate care required according to JEDEC
Standards
All Operating Modes
Human Body Model
Note: Sustained operation at or above the Absolute Maximum Ratings for any single or combinations of the above
parameters may result in permanent damage to the device and is not recommended. All Maximum RF Input Power
Ratings assume 50-Ohm terminal impedance.
GENERAL CHARACTERISTICS
Parameters
Operating Frequency
DC VDD Voltage Supply (Note 1)
Control Voltage “High”
Control Voltage “Low”
Control Pin Current Consumption
DC Shutdown Current
PA Turn On/Off Time
Input Single-Ended Impedance
ja (Note 2)
jc Bottom (Note 3)
jc Top (Note 3)
Min Typ Max Units
2.4
2.5 GHz
4.5 5.0 5.5
V
1.2
3.6
V
0
0.3
V
1
μA
5
μA
1 µsec
50
Ω
25
o_C/W
3.5
o_C/W
15
o_C/W
Conditions
All VDD Pins
For Indication Only
For Indication Only
Note 1 – For normal operation of the RFX242, VDD must be continuously applied to all VDD supply pins.
Note 2 – For operation above +85 ^oC, use the ja as guidance for system design to assure the junction temperature
will not exceed the maximum of +150 ^oC.
Note 3 – jc is provided for indication only. System operational design must be based on ja.
3
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com